Docomo PRIME series N-01A, Instruction Manual

Page: 393 / 602

391
Conv
enient Functions
● To stop the alarm
■ Alarm sound for Alarm
When the Snooze setting is set to “OFF”
Press any key to stop the alarm, animation and
i-motion. Press any key again, and the release tone
“pipip” sounds, and the animation, etc. disappears.
When the Snooze setting is set to “ON”
Press any key to stop the alarm, animation and
i-motion. The alarm message “Snooze...” appears,
then the alarm is given again at set interval (minutes).
Pressing
y
while “Snooze...” is displayed emits the
release tone “pipip”, and snooze is released.
■ Other alarm tones
Press any key to stop the alarm, animation and
i-motion. The alarm message remains displayed.
Press any key again to clear the alarm message (For
1Seg Timer recording, when “Activate TV w/ alarm” is
set to “OFF”).
■
When a call arrives during alarm notification
Alarm notification stops and the call is received. The
“Alarm” snooze is released.
Checking alarm content if notification
fails
If the alarm fails, the “ ” (Missed alarm)/“ ”
(Missed program) desktop icon appears on the
standby screen. Check the missed alarm content
(Missed alarm info) from the desktop icon.
1
On the standby screen
X
d
X
Select “ ” (Missed alarm) or
“ ” (Missed program)
The Missed alarm info appears.
■
To clear the desktop icon
X
t
(1 second or longer)
Once you clear the desktop icon, you can no
longer view the missed alarm information.
2 Check the content
When
t
is pressed, the standby screen
reappears and the desktop icon disappears.
N
z
The volume of the “Schedule” and “To Do list”
alarms is determined by “Phone” under “Ring
volume”. If “Level 3 to 6” or “Step” is set, the alarm
sound is played at “Level 2” when an alarm is
given in the following cases:
• Immediately after a voice call/videophone call
ends
• Immediately after PushTalk call ends
• Immediately after Record message/Voice memo
is recorded or during playback
• Immediately after “Voice announce”/VP memo is
recorded
z
The volume of the alarm tone during a call is the
same as “Volume”.
z
During a call, an alarm is not given in snooze
mode even when the Snooze setting is set to
“ON”.
z
Even if i-motion is set under “Alarm tone”, an
alarm is given with in alarm tone and animation
when i-motion cannot be activated, e.g. during a
call.
<Alarm notification priority sequence>
z
If “Alarm”, “Schedule”, “To Do list”, “1Seg booking
program” and “1Seg timer recording” alarms are
set for the same time, the priority applies:
① Alarm ② 1Seg timer recording ③ To Do list
④ Schedule ⑤ 1Seg booking program
If the alarm fails, the “ ” (Missed alarm)/“ ”
(Missed program) desktop icon appears on the
standby screen to let you know.
→ p.391