Docomo PRIME series N-01A, Instruction Manual

Page: 149 / 602

147
Security
Settings
Rejecting Calls from Callers
Not in the Phonebook
<Reject unknown>
Set whether to accept or reject calls from callers not
in the phonebook of the FOMA terminal (Phone) or
the FOMA card (UIM).
z
This function is valid for only calls with caller ID. It is
recommended that you also set “Caller ID Request”
and “Call setting w/o ID”.
z
You cannot set “Reject unknown” when “Set mute
seconds” under “Ring time (sec.)” is set to “ON”.
1
i
X
“Settings/Service”
X
“Lock/
Security”
X
“Reject unknown”
X
Enter your security code
X
“Reject” or “Accept”
Disabling Making/Receiving
Calls, etc.
<Self mode>
Disable voice/videophone/PushTalk call transmission,
i-mode, and mail transmission. This is useful when
you want to use the FOMA terminal without being
interrupted by incoming voice, videophone or
PushTalk calls.
z
You can make emergency calls (110, 119 and 118)
even when Self mode is set. Making an emergency
call releases Self mode.
1
i
X
“Settings/Service”
X
“Lock/
Security”
X
“Self mode”
X
“YES”
Self mode is set and “ ” appears.
■ To release Self mode
X
Repeat Step 1
Self mode is released and “ ” disappears.
●
When Self mode is set
z
Received voice or videophone calls are not
recorded in Received calls, and the “Missed call”
desktop icon does not appear on the standby
screen.
z
Arriving MessageR/F or i-mode mail are stored at
the i-mode center and SMS are stored at the SMS
center.
z
The voice or videophone caller hears an
announcement or message that the FOMA terminal
is out of range or turned off. When you use the
“Voice Mail” or “Call Forwarding” service, you can
use the same service provided when the power is
off.
z
When a PushTalk call arrives, “Disconnected” is
sent to other members.
z
Data exchange via Infrared data exchange/iC
communication, packet communication or 64K data
communication with a PC connected, user
authentication by IC card authentication and
Bluetooth communication are also unavailable.
However, data transmission using the USB cable
(OBEX
TM
communication) and reading data from
the IC card using Osaifu-keitai i-
α
ppli are available.
z
If the mute time is longer than the ringing time for
Record message, Record message is activated
without ringing first. To activate Record message
after ringing, set the ringing time for Record
message longer than the mute time. The same
applies to ringing times for Voice Mail, Call
Forwarding and Auto answer.
N
z
When you receive a call from a caller stored as
secret data in the phonebook, the call is not
rejected regardless of this setting.
z
When this option is set to “Reject”, the caller hears
the busy tone even if “Voice Mail” or “Call
Forwarding” service is activated. Note that if the
power is off or when “
” is displayed, or if the
ringing time set for “Voice Mail” or “Call
Forwarding” is 0 (zero) seconds, the busy tone is
not heard, and “Voice Mail” or “Call Forwarding” is
enabled.
z
i-mode mail and SMS are received regardless of
this option.
N