Docomo PRIME series N-01A, Instruction Manual, Page: 114 / 602

112
Sou
nd/Screen/Light Se
ttings
Changing Manner Mode
Settings
<Manner mode set>
Select the manner mode operations.
1
i
X
“Settings/Service”
X
“Incoming call”
X
“Manner mode
setting”
X
“Manner mode set”
2 Select any item:
Manner mode …… Mute all sounds coming from the
speaker, and use vibration to notify you of incoming
calls, etc. However, confirmation tones played
through earpiece (when a voice memo or memo is
played) are not muted.
Super silent …… Mute all sounds coming from the
speaker and confirmation tones coming from the
earpiece, and use vibration to notify you of incoming
calls, etc.
Original → p.112
Setting the original manner
Set your preferred manner mode settings.
z
The following are the default settings of the
“Original” manner mode:
• Record message: OFF
• Vibrator: ON
• Phone vol.: Silent
• Mail vol.: Silent
• Alarm vol.: Silent
• i-
α
ppli vol.: Silent
• VM tone: ON
• Keypad sound: OFF
• Mic sensitivity: Up
• LVA tone: OFF
1 Manner mode set screen (p.112)
X
“Original”
X
Select any item:
Record msg.
→
p.78
Vibrator → p.106
Phone vol. …… Set the ring tone volume for voice/
videophone calls, PushTalk calls and 64K data
communication.
→
p.74
Mail vol.
……
Set the ring tone volume for mail, chat
mail, packet communication, MessageR/F, i-concier
information and i-
α
ppli call.
→
p.74
Alarm vol. → p.384
i-
α
ppli vol.
→
p.288
However, “Step” cannot be set.
VM tone …… Set confirmation tones for “Record
message”, “Voice memo”, etc.
Keypad sound → p.107
Mic sensitiv. …… Select Normal/Up for the
microphone sensitivity during calls.
LVA tone …… Set the low-voltage alarm.
“When the battery runs out” → p.53
2
o
(Finish)
Changing the Display
<Display setting>
You can also set still images you captured or
downloaded as the standby screen, dialing/calling
screen, etc.
1
i
X
“Settings/Service”
X
“Display”
X
“Display setting”
Manner mode set
N
z
The record message function set in “Original”
starts when the ring time set in “Record message”
(p.78) is over (when set to “OFF”, recording starts
in 13 seconds).
z
If the microphone sensitivity during calls is set to
“Up”, the voice heard by the other party gets loud
even if you speak quietly. The microphone
sensitivity is set to “Normal” when capturing
movies with “Camera”.
Display setting