- On trains
- On airplanes
- In hospitals
- Near automatic doors or fire alarms
- In places such as gas stations where
flammable gas is generated
■ Reception interference caused by wireless
LAN devices
• As this terminal’s Bluetooth device and
wireless LAN devices use the same
frequency (2.4 GHz), reception interference
may occur or the communications speed
may lower if you use the Bluetooth device
near the wireless LAN devices. Also, you
may hear noise or have a connection
problem. In these cases, do the following:
- Keep the Bluetooth device over 10 m
away from a wireless LAN device.
- Within 10 m, turn off either the Bluetooth
device or the wireless LAN device.
■ Pass code (PIN) of Bluetooth function
• Pass code (PIN) is an authentication
code to enter when accessing Bluetooth
devices for the first time to recognize and
permit the connection each other. Entering
the same pass code (PIN) (up to 16 single-
byte alphanumeric characters) on each
sending/receiving device is required.
• On this terminal, pass code may be
displayed as "PIN".
Turning ON Bluetooth Function to
Make this terminal Discoverable
a
From the Home screen,
u
"Settings"
u
"Bluetooth"
b
Place a check mark on "Bluetooth"
c
"Make phone visible"
• This terminal can be detected by another
Bluetooth device for approx. 120 seconds.
Note
• When you do not use Bluetooth function,
turn it OFF to save the battery.
• The setting of the Bluetooth ON/OFF
is not changed even when the power is
turned off.
161
File Management