Docomo N-02D, Instruction Manual, Page: 82 / 166

More C
onvenien
t
80
■
To receive one data item
i s
"Tool"
s
"Receive Ir data"
s
"Receive"
s
Direct the infrared data port toward
the infrared data port of the other party's device s Upon completion of reception, "YES"
Sending/receiving data by iC transmission
iC transmission is a function that allows you to send or receive data such as phonebook
entries to or from other FOMA terminals just by overlapping the FOMA terminals.
・
You may not be able to transfer data depending on the other party's device.
■
To send one data item
<Example: To send one phonebook data>
❶
On the screen of the data to send, i (Submenu) s "Send data" s "iC transmission"
❷
Put your
e
mark close to the other party's FOMA terminal
s
"YES"
■
To receive one data item
Put your
e
mark close to the other party's FOMA terminal
s
Perform data transmission on the other party's FOMA terminal
Connecting to a PC
You can transfer WMA data, images, etc. to/from a microSD card by connecting the FOMA
terminal to a PC. Also, you can perform data communication by accessing to Internet.
・
The FOMA USB Cable with Charge Function 02 (optional) or FOMA USB Cable (optional) is required.
・ To transfer data, you need to install the "FOMA communication setting file" (driver). For details, refer to the "Manual for PC Connection".
"FOMA communication setting file" (driver) and "Manual for PC Connection" can be downloaded from NTT DOCOMO website.
http://www.nttdocomo.co.jp/english/support/
DOCOMO Connection Manager
"DOCOMO Connection Manager" is a useful software for performing DOCOMO data communications.
・ "DOCOMO Connection Manager" enables simplification of appropriate setting on PC
depending on the subscription. The fare counter function is also available for checking an
indication of the data traffic or usage amount. For details, refer to NTT DOCOMO website.
http://www.nttdocomo.co.jp/support/utilization/application/service/connection_manager/
(in Japanese only)