Docomo FOMA P706ie, Instruction Manual, Page: 560 / 577

43
11
Click the “ オプション (Option)” tab, then click
“PPP 設定 (PPP settings)”.
12
Uncheck all the items, then click “OK”.
13
Return to the display in step 10, then click
“OK”.
Perform the operation on page 3 to connect the FOMA
phone to your personal computer.
1
“ [
スタート
(Start)]”
1
Open “
接続先
(Access point)”.
2
Select access point and click “
接続
(Connect)”.
3
Confirm the contents and click “
ダイヤル
(Dial)”.
≥
When connecting to “mopera U” or “mopera”, you can leave the
user name and password fields blank.
4
The display appears to indicate the connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
Making Dial-up Connection
5
After the connection is completed, click “ 閉じる (Close)”.
≥
You can start the browser software to browse web pages, use
e-mail and so on.
1
Click the dial-up icon on
the task tray.
2
Select “ 接続または切断 (Connect or
disconnect)”, then click “ 切断 (Disconnect)”
1
Click “ 閉じる (Close)”.
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.