Docomo FOMA P706ie, Instruction Manual, Page: 536 / 577

19
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to “FOMA P706ie” (modem) embedded after you install
the “FOMA communication setup files” (driver).
The confirmation method varies depending on the
operating system of your personal computer.
≥
When using DOCOMO Internet access service “mopera U” or
“mopera”, you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
1
“
スタート
(Start)”
1
Open “
コントロールパネ
ル
(Control panel)”.
2
From “ プリンタとその他のハードウェア
(Printer and the other hardware)” in “ コント
ロールパネル (Control panel)”, open “ 電話とモ
デムのオプション (Phone and modem
options)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番/エリアコード
(City code/Area code)”, then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P706ie”, then click
“OK”.
≥
The COM port number you confirmed is used to set an access
point name (APN) (see page 20).
≥
The contents on the property display and COM port number vary
depending on the personal computer you use.
Confirm COM Port Number
For Windows XP
1
“
スタート
(Start)”
1
“
設定
(Setting)”
1
Open
“
コントロールパネル
(Control panel)”.
2
Open “ 電話とモデムのオプション (Phone and
modem options)” in “ コントロールパネル
(Control panel)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
(City code)”,
then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P706ie”, then click
“OK”.
≥
The COM port number you confirmed is used to set an access
point name (APN) (see page 20).
≥
The contents on the property display and COM port number vary
depending on the personal computer you use.
For Windows 2000