Docomo FOMA P706ie, Instruction Manual, Page: 521 / 577

4
Installing the FOMA communication setup files (driver)
is required when you connect the FOMA phone to your
personal computer via the FOMA USB Cable with
Charge Function 01/02 (option) for the first time.
≥
Operate as the user who has the PC administrator right.
1
Connect the FOMA phone and the FOMA USB
Cable with Charge Function 01/02. (See
page 3)
2
Start Windows, then set the provided “FOMA
P706ie CD-ROM” into the personal computer.
■ Removing
1. While holding down the release buttons of the external connector
of the FOMA USB Cable with Charge Function 01/02, straight pull
out the connector.
2. Pull out the FOMA USB Cable with Charge Function 01/02 from
the USB terminal of the personal computer.
For Using
Windows XP/
Windows 2000
Installing FOMA Communication Setup
Files (Driver)
For Windows XP
Information
≥
Do not disconnect the FOMA USB Cable with Charge Function 01/02
forcibly. Malfunction may result.
≥
Do not disconnect the FOMA USB Cable with Charge Function 01/02
during data communication. Erroneous operation or malfunction of
the personal computer or FOMA phone, or loss of data could result.
≥
Do not connect/disconnect the FOMA USB Cable with Charge
Function 01/02 in succession. Once you connect the cable, wait for a
while, then disconnect it and vice versa.
Release button
Release button
3
Click “ データリンクソフト・各種設定ソフト
(Data link software/Setup software)”.
≥
If this display appears during installation of the “FOMA
communication setup files” (driver), close the display.
4
Click “ インストール (Install)” under “ FOMA通
信設定ファイル（USBドライバ） [FOMA
communication setup files (USB driver)]”.
5
Double click “FOMAinst.exe” in opened
folder.
6
Read “
ソフトウェア使用許諾契約書
(Software
licensing contract)”, and click “
同意する
(Agree)”.