Docomo FOMA P706ie, Instruction Manual, Page: 47 / 577

45
Before Using the Handset
You can select whether to correct the time automatically or set it
manually. The time is set/displayed on the 24-hour basis.
1
m 1
Settings
1
Clock
1
Set time
1
Auto time adjust ON or Auto time adjust OFF
Auto time adjust ON
. . . .Corrects the date/time automatically. The setting is completed.
When the time cannot be corrected automatically such as when “ ” is
displayed and the date/time has not been set, the Manual Time Setting
display appears. Follow step 2 to set the date/time.
Auto time adjust OFF
. . . .Sets the date/time manually.
≥
When “Notice call cost” is set to “ON”, you need to enter your Terminal Security
Code.
2
Enter year, month, date and time.
Use
M o
to move the cursor and enter numbers by the
numeric keys.
≥
To enter one-digit numeral for the date and time, enter
two digits beginning with “0” as in “01” through “09”.
≥
Highlight “time zone” and press
l
( ) to set the
time zone. Use
M o
to select a region and press
O o
( ).
≥
When the power is automatically turned on by alarm notification, the Initial Setting
display does not appear even if there is any unset function.
≥
When you finish the initial settings, the confirmation display appears telling that
updating software is executed automatically. This display appears only at the first
time, and after that, does not appear until you execute Reset Settings or Initialize.
+ m - 3 - 1
<Set Time>
Setting Date and Time
Information
The time displayed on the FOMA phone is corrected according to the clock information
obtained from the network.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set. If you want to set the time with a lag, set the time manually.
≥
Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i-
α
ppli program set for the i-
α
ppli Stand-by display.
≥
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
≥
Depending on the networks overseas, the time difference might not be corrected.
About date/time correction function
Information
≥
Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
≥
The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
phone and then perform the clock setting.
≥
When “time zone” is set to other than “GMT +9” or the time difference is corrected
overseas, the sub clock (Japanese date/time, etc.) is displayed under the Stand-by
display clock. However, the sub clock is displayed over the Stand-by display clock
when “Clock display” is set to “Largest”.
≥
This function supports clock settings from 00:00 on January 1, 2008 through 23:59 on
December 31, 2037.