Docomo FOMA P706ie, Instruction Manual, Page: 401 / 577

399
Network Se
rvic
es
You can set “Voice mail” or “Call forwarding” to be operated from
touch-tone landline phones, public phones, DOCOMO mobile phones, or
others.
≥
To use “Voice mail” or “Call forwarding” overseas, you need to set “Remote control” to
“Activate” in advance.
1
m 1
Service
1
Remote control
1
Do the following operations.
You can add and use the additional number 1 and 2 at maximum as the
phone numbers of your FOMA phone besides the basic number.
≥
When you remove or replace the UIM, the multi number settings (name, phone
number, etc.) stored in the FOMA phone might be erased. In this case, store them
again.
≥
The name that corresponds to each multi number (Basic Number/Additional Number1/
Additional Number2) appears on the dialing display/Call Receiving display.
≥
When you try to make a call from Redial, Dialed Calls, or Received Calls, the multi
number you dialed/received at that time appears and the call is made by this number.
<Remote Control>
Setting Remote Control
Item Operation/Explanation
Activate
1
YES
Deactivate
1
YES
Check setting You can check the setting contents of Remote Control.
Information
≥
You can set and confirm this setting from the FOMA phone with your own UIM
inserted. You cannot remote-control the setting from landline phones, public phones,
and other mobile phones.
<Multi Number>
Setting Additional Number
You can edit the registration name for the basic number, register
additional numbers, and edit the registration names for them.
1 m 1
Service
1
Multi number
1
Number setting
1
Select a phone number.
≥
You can register/edit also by pressing
i
( ) and selecting “Edit” or by
pressing
l
( ).
≥
Select the basic number or registered additional number to check the registration
name and phone number.
≥
To reset the registration name of the basic number, press
i
( ) and select
“Reset BasicNo. name”, then select “YES”.
≥
To delete the registered additional number, press
i
( ) and select “Delete
this” or “Delete all”, then select “YES”.
2
Enter a registration name
1
Enter a phone number.
≥
You can enter up to 8 full-pitch/16 half-pitch characters for a registration name.
≥
You cannot edit the phone number of the basic number.
By switching this setting, you can make all calls from a specified phone
number.
1
m
1
Service
1
Multi number
1
Set multi number
1
Select a phone number.
Basic Number . . . . . . . . . . . Dials by the contracted phone number.
Additional Number1/2 . . . . Dials by an additional number.
≥
When the registration name is changed, each registration name is displayed.
However, the registration name is not displayed during Personal Data Lock.
2
YES
Number Setting
Set Multi Number