Docomo FOMA P706ie, Instruction Manual, Page: 328 / 577

326
Data Di
sp
lay
/Edi
t/Ma
n
ag
emen
t
<Folder security>
≥
You can set it only for “i-mode”, “Camera”, “User folder”, and “Voice record”.
≥
When you select a folder with folder security, the display for entering your Terminal
Security Code appears. Enter your Terminal Security Code to temporarily release
folder security.
<Edit playlist>
≥
If you change or delete the file name, title, or contents of the melody stored in the
playlist, all the melodies are released from the playlist.
<Select storage>
≥
The following icons are displayed for the folder set as a destination folder:
“
” . . . The folders in the “Picture” folder and “Movie” folder
“ ” . . . The folders in “SD other files”
The folders in the “Deco-picto.” folder, “Image Box” folder, and “Melody”
folder
“ ” . . . The folders in the “Movable” and “Kisekae Tool” folder
“ ” . . . The folders in the “Others” folder
≥
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
Information
The FOMA phone conforms to IrMC™ version 1.1 standard.
You can exchange data files with the devices supporting the infrared data
exchange function. However, you cannot exchange some files depending
on the other party’s device.
≥
The distance for infrared data exchange should be within about 20 cm. Do not move
the FOMA phone with the infrared data port pointed to the receiving end until data
transfer ends.
≥
Hold the FOMA phone with your hands securely so that it does not move.
≥
If you expose the FOMA phone to direct sunlight or put it under fluorescent lights or
near an infrared equipment, you may not be able to transmit infrared ray normally due
to their influence.
≥
First set at the receiving end and begin sending data from the sending end within 30
seconds.
≥
During exchange, the FOMA phone is placed in the same state as it is out of the
service area, so you cannot make/receive voice calls or videophone calls, use packet
communication such as i-mode or mail, or use data communication.
About Infrared Data Exchange
Infrared data port
Within ±15° from
the center
Within about 20 cm