Docomo FOMA P706ie, Instruction Manual, Page: 264 / 577

262
1Se
g
The broadcasting stations you can currently watch are automatically
searched and stored in a channel list.
≥
You need to set this function in the terrestrial digital TV broadcasting service area.
1
m 1
1Seg
1
Channel setting
1
Auto channel setting
1
YES
Searching takes place.
≥
From the Channel list display or viewer display, press
i
( ), select
“Channel setting”, and select “Auto channel set”.
2
YES
1
Enter a title.
≥
You can enter up to 11 full-pitch/22 half-pitch characters.
≥
When you press
O o
( ) without entering a title, the title name takes the
name of “YYYY/MM/DD hh:mm”. (Y: year, M: month, D: date, h: hour, m: minute)
≥
To cancel searching midway, press
l
( ) or
r
; then select “YES”. You
can store the searched broadcasting stations in a channel list.
You can store the broadcasting stations set by prefecture to a channel
list.
1
m 1
1Seg
1
Channel setting
1
Select area
1
Select an area
1
Select a prefecture
1
YES
≥
From the Channel list display or viewer display, press
i
( ), select
“Channel setting”, and select “Select area”.
Auto Channel Setting
Information
≥
When the multiple broadcasting stations which have the same remote-control number
are retrieved, the message to the effect that the remote-control number is doubled
appears. Select “OK” and select your area from the Local Area Selection display. The
channels in the area you select are preferentially assigned to remote-control numbers
1 to 12, and channels in the area you do not select are assigned to remote-control
numbers 13 onward.
≥
The time to search channels requires for about 30 to 60 seconds. However, it differs
depending on the number of broadcasting stations or airwave conditions, and might
exceed 60 seconds.
Select Area
You can select a channel list to set the broadcasting stations you receive.
Also, you can edit the channel list already stored.
1
m 1
1Seg
1
Channel list
1
Select a channel list.
The channel list you receive
is set, and the detailed
display appears.
≥
Select a broadcasting
station to watch a 1Seg
program.
≥
When you select “Channel
list” from the Function
menu of viewer display, the
viewer display returns by
selecting a channel list.
≥
You can watch a 1Seg
program also by pressing
l
( ) from the Channel list display and selecting
a broadcasting station.
Information
≥
Depending on the area, you may not be able to correctly store the broadcasting
stations by “Select area”. In that case, search for the broadcasting stations by “Auto
channel setting”.
Select Channel List
Channel list display Detailed Channel list
display
Remote-control number
Function Menu of the Channel List Display
Function menu Operation/Explanation
Channel setting See page 261.
Edit title
1
Enter a title.
You can enter up to 11 full-pitch/22 half-pitch characters.
Delete
1
YES
≥
You cannot delete the channel list currently set.