Docomo FOMA P706ie, Instruction Manual, Page: 245 / 577

243
i-
α
pp
li
≥
For service contents and details of subscriptions, refer to the
i-mode site of DCMX.
i-mode site:
i
Menu
→
DCMX iD
“ FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” enables you to check
whether the FOMA phone is available at the FOMA
High-Speed Area.
≥
Use “ FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” with your consent to “
ご利
用の注意 (Cautions in use)”.
≥
Depending on the communication environment (such as
weather, radio wave conditions, network congestion state) at
communication environment check, the different result or “out
of service” might appear even in the same area or at the
same period of time.
≥
You might not be able to check correctly if you use another function while using this
application program.
QR code for
accessing the site
Information
≥
To start this application program for the first time, you need to agree with “
ご利用上の
注意 (Cautions in use)”.
≥
You are charged a packet communication fee for settings and operations.
■ Cautions on Osaifu-Keitai compatible i-
α
ppli
Note that we take no responsibility for any information set on your IC card.
FOMA 通信環境確認アプリ
(FOMA Communication Environment Check Application)
※ The display is for reference.
The actual one may differ.
1
m 1
i-
α
ppli
1
i α
ppli settings
1
Do the following operations.
<
i α
ppli Settings>
Setting i-
α
ppli
Item Operation/Explanation
Auto start setting See page 244.
Disp. software info See page 231.
Preferred tone You can set which sound to be output preferentially, from MUSIC/
1Seg or i-
α
ppli program, for when you start an i-
α
ppli program
during music playback or use of 1Seg.
1
MUSIC/1Seg or
i α
ppli
α
Backlight You can set the backlight operation for when an i-
α
ppli program is
running.
1
Select an item.
Depend on system . . . .Follows the setting of “Backlight”.
Depend on software . . .Follows the setting of each software
program.
Constant light . . . . . . . . .Lights constantly.
α
Power saver You can set to Power Saver Mode to decrease battery
consumption by suspending the i-
α
ppli program temporarily for
when you close the FOMA phone during i-
α
ppli running.
1
ON or OFF
≥
This setting is valid from when an i-
α
ppli program starts until it
closes.
≥
Even when this function is set to “ON”, Power Saver Mode
becomes invalid if “Power saver” that can be set for each i-
α
ppli
program is set to “OFF”.
α
Vibrator You can set the vibrator operation for when an i-
α
ppli program is
running.
1
Depend on system or Depend on software
Depend on system . . . .Does not work regardless of the setting
of “Vibrator”. With some software
programs, the vibrator works.
Depend on software . . .Follows the setting of each software
program.
Check settings You can check each of “
i α
ppli settings”.