Docomo FOMA P706ie, Instruction Manual, Page: 236 / 577

234
i-
α
ppl
i
Delete
(Delete this)
1
Delete this
1
YES
Delete
(Delete selected)
1
Delete selected
1
Put a check mark for software programs
to be deleted
1 l
( )
1
YES
Delete
(Delete all)
1
Delete all
1
Enter your Terminal Security Code
1
YES
Move to microSD See page 320.
Move to phone See page 320.
Power saver You can set whether to validate Power Saver Mode for each
i-
α
ppli program for when “
α
Power saver” is set to “ON”.
1
ON or OFF
Function menu Operation/Explanation
Information
<Software setting (Icon info)>
≥
When you set “Software setting (Icon info)” to “ON” for the i-
α
ppli Stand-by display, the
icon information for unread mail/message, battery level, Manner Mode, radio wave
strength and out-of-service area can be sent to the IP (Information Provider) over the
Internet in the same way as the serial number of your mobile phone/UIM, and can be
deciphered by third parties.
≥
When the software program needs “Software setting (Icon info)”, the software
program might not run if “OFF” is selected.
<Upgrade>
≥
Depending on the software program, you can upgrade it at start.
≥
At upgrading, the confirmation display might appear asking whether to send the “serial
number of your mobile phone/UIM”. Select “YES” to start upgrading. In this case, the
“serial number of your mobile phone/UIM” is sent to the IP (Information Provider) over
the Internet, so could be deciphered by third parties. However, your phone number,
address, age, and gender are not notified to the IP (Information Provider) or others by
this operation.
≥
You cannot upgrade the mail-linked i-
α
ppli in the following cases:
・ While details of the corresponding i-
α
ppli mail folder are displayed
・ While Mail Security is set
・ When Mail Security is set for the corresponding i-
α
ppli mail folder
The confirmation display appears asking whether to delete the i-
α
ppli mail folder as well.
If you do not delete it, you can check the text of mail from the Outbox/Inbox list.
YES. . . . . . Deletes both the software program and the i-
α
ppli mail folder.
NO. . . . . . . Deletes the software program only and the i-
α
ppli mail folder is left.
Cancel. . . . Does not delete both the software program and i-
α
ppli mail folder; the former
display returns.
≥
You can delete neither the i-
α
ppli program nor the i-
α
ppli mail folder even if you select
“YES”, in the following cases:
・ While Mail Security is set ・ While the folder is set with security
・
While displaying details of the folder
・
When the folder contains protected mail
The confirmation display appears asking whether to delete files on the microSD card as
well.
YES. . . . . . Deletes both the software program and files on the microSD card. Press
“YES” again on the confirmation display. You need to enter your Terminal
Security Code to execute “Delete” or “Delete selected”.
NO. . . . . . . Deletes the software program only and the files are left.
Cancel. . . . Does not delete both the software program and files on the microSD card,
and the former display returns.
The confirmation display appears telling that the files on the IC card will be deleted.
≥
You cannot delete the “
iD 設定アプリ
(iD Setting Application)”.
≥
You might not be able to delete the Osaifu-Keitai compatible i-
α
ppli while the IC card
function is working or IC Card Lock is set.
When you delete mail-linked i-
α
ppli
When you delete an i-
α
ppli program whose files are on the
microSD card
When you delete Osaifu-Keitai compatible i-
α
ppli