Docomo FOMA P706ie, Instruction Manual, Page: 234 / 577

232
i-
α
ppl
i
≥
You can display the Software list on the microSD card by
m 1
i-
α
ppli
1
i α
ppli(microSD)
1
Software list.
≥
Each time you press
c
( ) from the Software list in the FOMA phone, the
display format changes.
≥
When you start an i-
α
ppli DX program or while it is running, the confirmation
display might appear asking whether to permit the i-
α
ppli DX program to use the
FOMA phone’s information and functions.
≥
When you start the Osaifu-Keitai compatible i-
α
ppli program for the first time, the
confirmation display appears asking whether to make the UIM and IC card
compatible. The UIM information that has been made compatible is saved on the
IC card as IC owner information.
≥
When you select a partially saved i-
α
ppli program, you can download the
remaining part of it.
≥
“ ” or “ ” is displayed while an i-
α
ppli program is running.
≥
To end i-
α
ppli, press and hold
r
for at least one second or press
h
; then
select “YES”.
≥
The software program you started last time comes at the top of the list. You
cannot manually change the order of software programs.
≥
See page 167 when you select “
i
モードで探す (Search by i-mode)”.
Information
≥
When a software program can be started from another program, the confirmation
display appears. When a software program to be started is not specified, select a
software program.
≥
To start up i-
α
ppli DX, set the data and time by “Set time” beforehand.
≥
When a software program is running, melodies are played back at the volume set for
“Phone” of “Ring volume”. However, melodies are not played back during a call.
≥
You may need to set the communication setting while a software program is running.
≥
When communicating frequency is extremely high in a certain period of time while an
i-
α
ppli program is running, the confirmation display appears asking whether to
continue communicating.
≥
With some software programs, you can use the Web To function and the Phone To/
AV Phone To function from i-
α
ppli. However, you cannot use them while the software
program is running as the i-
α
ppli Stand-by display.
≥
If you start the camera from i-
α
ppli, the shot images are not saved with ordinary
images, but are saved as part of i-
α
ppli for its usage.
≥
If you start the camera from i-
α
ppli, you can specify the image size or image quality for
some i-
α
ppli programs.
≥
You can scan QR codes and JAN codes from i-
α
ppli using the camera. The scanned
data is saved and used by the software program.
≥
Images
※
that are used by i-
α
ppli and data you have entered might be sent over the
Internet to the server automatically.
※ i-
α
ppli uses the following types of images:
・ Images shot by the camera after it is started from a camera-linked application
program
・ Images obtained by the infrared data exchange function of i-
α
ppli
・ Images downloaded from sites or Internet web pages
・ Images obtained from Data Box by i-
α
ppli
≥
i-
α
ppli mail running under mail-linked i-
α
ppli might not be displayed correctly.
≥
Some i-
α
ppli programs save the various information used on the i-
α
ppli programs
when you end them. However, the information might not be saved if the low battery
alarm sounds or the battery pack is removed while the i-
α
ppli program is running. If
the battery level indicates “ ”, either press
- h
or end the i-
α
ppli program in
accordance with the operation of each software program.
≥
You can save the data files of some software programs to the microSD card, but you
might not be able to use them for another model. You can check “
i α
ppli data” for the
software programs that use the microSD card.
≥
Some IPs (Information Providers) may access the software program stored in your
mobile phone and have it directly halted, depending on the software program. In that
case, you will not be able to start or upgrade the software program, or use it for the
Stand-by display. You can delete it or display the software information. To resume
running the software program, you need to receive the communication to cancel the
software halting state. Contact the IP (Information Provider) to inquire about that.
≥
Some IPs (Information Providers) might send data to the software program stored in
your mobile phone depending on the software program.
≥
When the IP (Information Provider) requests to halt or re-open the software program
or sends data to it, the mobile phone communicates and “
” is displayed. In this
case, you are not charged a communication fee.
≥
To creators of i-
α
ppli
If you encounter an error while creating a software program, the Trace Information
display might help identify the problem.
For how to check the trace information, see “Trace Information” on page 233.
Information