Docomo FOMA P706ie, Instruction Manual, Page: 222 / 577

220
Mai
l
1
l 1
Area mail settings
1
Do the following operations.
<Area Mail Settings>
Setting Early Warning “Area Mail”
Item Operation/Explanation
Receive setting You can set whether to use Area Mail.
1
Read exemption clause thoroughly
1
Yes or No
Receive entry You can register Message IDs for the reports to be received other
than emergency information. You can register up to 20 IDs.
≥
You do not need to operate “Receive entry” for receiving only
emergency earthquake alert and disaster/evacuation
information.
1
<New>
1
Enter your Terminal Security Code
1
Enter a registration name
1
Enter a Message ID.
≥
To edit a registered Message ID, highlight it, press
l
( ),
and then enter your Terminal Security Code.
≥
You can enter up to 15 full-pitch/30 half-pitch characters for an
arbitrary registration name. For a Message ID, enter 4 half-pitch
characters specified by the service provider.
≥
You can edit also by selecting “Edit” from the Function menu.
Select “Delete this” to delete the Message ID, and select
“Delete all” and enter your Terminal Security Code to delete all
Message IDs.
≥
You cannot edit/delete “Emergency information”.
Beep setting You can set whether to make the beep sound for when you
receive an Area Mail message that beeps.
1
ON or OFF
≥
When you set “OFF”, the dedicated ring tone for Area Mail
sounds.
Beep time You can set the duration the beep sounds.
1
Enter a beep time (seconds).
≥
Enter it in two digit, from “01” through “30”.
You can send or receive chat mail messages to and from multiple
persons on a single display. To use Chat Mail, you need to store chat
members. You can easily store them by creating chat groups.
You can store up to six chat members including the user (yourself).
1
l 1
Chat mail
1 i
( )
1
Chat member
1
<Not recorded>
1
Enter a mail address.
≥
To edit a stored member, select the member.
≥
When the mail address is “phone
number@docomo.ne.jp”, store the phone number only.
≥
You can enter up to 50 half-pitch characters.
<Chat Mail>
Using Chat Mail
Store Chat Members
Chat Member list
Information
≥
If you edit the mail address of the stored member, the member’s name and image are
changed.
Function Menu of the Chat Member List
Function menu Operation/Explanation
Edit You can edit the mail address.
Go to step 1 of “Store Chat Members” on page 220.