Docomo FOMA P706ie, Instruction Manual, Page: 119 / 577

117
Secu
rity Se
tti
n
g
s
When the PIN1 Code/PIN2 Code Entry display appears, enter your four- to
eight-digit PIN1 code/PIN2 code and press
O o
( ).
≥
The entered PIN1 code/PIN2 code is displayed as “_”.
≥
If you enter a wrong PIN1 code/PIN2 code three times in
succession, it is locked and the FOMA phone cannot be
used. (The remaining number of times you can enter appears
on the display.)
When you enter the correct PIN1 code/PIN2 code, the
remaining number of times you can enter will return to three
times.
The PUK (PIN unblock code) is the eight-digit number for releasing the
PIN1 code and PIN2 code lock state. You cannot change this code by
yourself.
≥
If you enter a wrong PUK (PIN unblock code) 10 times in succession, the UIM is
locked.
PUK (PIN Unblock Code)
For PIN1 code
Wrong entry 3 time s in su cce ss ion
Entry OK Wrong entry 10 time s
in su cce ss ion
Sec u rity when the power t u rn s on
Set new PIN code
Con su lt the h a ndling
co u nter of a DOCOMO s hop
Enter PUK (PIN u n b lock code)
Enter PIN1 code Enter PIN2 code
Oper a tion of us er certific a te
Connecting to Fir s tP ass s ite s
Change the default for the Terminal Security Code required for operating
functions to your own four- to eight-digit code so that you can make full
use of the FOMA phone. Make sure you take a note of the security code
you have changed just in case you forget it.
1
m 1
Settings
1
Lock/Security
1
Change security code
1
Enter the current Terminal Security Code.
≥
If you enter the code for the first time, enter “0000”.
2
Enter a new Terminal Security Code (four to eight digits)
1
YES
You can set the FOMA phone not to work unless you enter your PIN1
code when turning on the power.
1 m 1
Settings
1
Lock/Security
1
UIM setting
1
Enter your Terminal Security Code
1
PIN1 code entry set
1
ON or OFF
1
Enter the PIN1 code.
≥
S ee page 116 for the PIN1 code.
+ m - 2 - 9
<Change Security Code>
Changing Terminal Security Code
<UIM Setting>
Setting PIN Code
PIN1 Code Entry Set