Docomo FOMA P706ie, Instruction Manual, Page: 551 / 577

34
The operation below explains how to carry out various
settings related to the packet communication and 64K
data communication.
There are “auto setting” for easy operation and “manual
setting” for the user familiar with personal computers.
Before setting, confirm that the FOMA phone is
connected to your personal computer.
1
“ [
スタート
(Start)]”
1
“
すべてのプログラ
ム
(All programs)”
1
“FOMA PC
設定ソフト
(FOMA PC setup software)”
1
Open “FOMA
PC
設定ソフト
(FOMA PC setup software)”.
Using this PC setup software, you can easily create FOMA dial-up
setting by answering (selecting and entering) the displayed
questions according to “the information of connected provider” and
“connection method” you selected.
･
See page 34 for setting the packet communication from “
かんたん
設定 (Easy Setting)”.
･ See page 36 for setting the 64K data communication from “ かんた
ん設定
(Easy Setting)”.
･ See page 39 for setting “ 接続先 (APN) 設定 [access point name
(APN) setting]”.
■ Checking the version information about “FOMA PC setup
software”
Select “ メニュー (Menu)” → “ バージョン情報 (Version information)” from
the menu of the “FOMA PC setup software”.
The version information about the “FOMA PC setup software” is
displayed.
Setting Communication
1
“ メニュー (Menu)” of “FOMA PC setup
software”
1
Select “ 通信設定 (Communication
setup)”.
･ 自動設定（推奨） [Auto-setup (recommended)]
The connected FOMA phone is automatically specified. Usually,
select “Auto-setup”.
･ COM ポート指定 (Specifying COM port)
When specifying a COM port number, specify the COM port
number (COM1 through 99) the FOMA phone is connected to.
≥
See page 41 for how to check the COM port number.
2
Click “OK”.
The settings are applied.
This section explains how to make settings for a
high-speed packet communication of 3.6 Mbps maximum.
This setting is for when you use DOCOMO Internet
connection service “mopera U” or “mopera” as a provider.
High-speed packet communication:
You are charged according to the amount of data sent/
received. You can execute data communication without
worrying about time.
High-speed packet communication of up to 3.6 Mbps for
receiving and up to 384 kbps for sending is available.
Note that a communication fee becomes expensive if
you send/receive a large amount of data such as by
browsing web pages having many images, or by
downloading the data.
≥
The communication speed for both sending and receiving is up to
384 kbps for “mopera” connection.
1
Click “
かんたん設定
(Easy Setting)”.
2
Select “
パケット通信
(Packet
communication)”, then click “
次へ
(Next)”.
Confirm that “ パケット通信 (Packet communication)” is checked,
then click “
次へ
(Next)”.
Specify Communication Port
Select Packet Communication from
“
かんたん設定
(Easy Setting)”
Using “mopera U” or “mopera” as an access point