Docomo FOMA P706ie, Instruction Manual, Page: 532 / 577

15
3
Click the dial-up icon on
the task tray to check for
the connection.
≥
You can start the browser software to browse web pages, use
e-mail, and so on.
1
Click the dial-up icon on
the task tray.
2
Click “ 切断 (Disconnect)”.
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.
Before uninstalling the “FOMA PC setup software”,
reset the contents modified for the FOMA phone to the
default.
1
Exit the currently running programs.
≥
Exit the “ 通信設定最適化ソフト
(Communication setup optimization
software)”.
Right click “
通信設定最適化ソフト
(Communication setup optimization
software)” on the task tray at the
bottom right of the display, and select “
終了 (Exit)”.
≥
Exit the “FOMA PC setup software”.
Click “
終了
(Exit)” at the bottom right of the FOMA PC setup
software.
≥
If you try to uninstall during running of the “FOMA PC setup
software” or “Communication setup optimization software”, the
display below appears. Stop the uninstallation processing, and exit
those programs.
Uninstalling FOMA PC Setup Software
Before Uninstalling
Right-click
Click