Docomo FOMA P706ie, Instruction Manual, Page: 263 / 577

261
1Seg
<Example> When you watch a 1Seg program for the first time
Store the channel list for the area you use. (See page 261)
Activate 1Seg. (See page 263)
■ Battery level
If you try to start 1Seg or 1Seg starts automatically by Book Program when the battery is
low, the battery alert tone sounds, and the confirmation display appears asking whether
to start it. Also, when the battery becomes low while you are watching or recording a
1Seg program, the battery alert tone sounds, and the confirmation display appears
asking whether to end 1Seg. The battery alert tone sounds regardless of the setting of
“Keypad sound”.
≥
When you do nothing from the confirmation display for about one minute, 1Seg
automatically terminates.
≥
While “Rec. when low battery” is set to “ON”, the confirmation display does not appear
during recording. (See page 276)
≥
If the battery level becomes low during recording and recording ends, the video
recorded up to that point is automatically saved.
≥
During Multitask, the battery alert tone sounds but the confirmation display does not
appear. Switch to the viewer display and then operate.
■ When a call etc. comes in while you are watching or recording a 1Seg program
When an event shown below occurs while watching or recording a 1Seg program, the
video and audio are suspended, and each function works. Recording is not suspended.
After you finish each function, you can resume watching a 1Seg program. See page 267
for receiving i-mode mail messages, SMS messages or Messages R/F.
≥
Incoming voice call, videophone call
(To start recording when a call is received, refer to “Rec. program when call”.)
≥
Notification of Alarm, Schedule, ToDo, Book Program
(when “Alarm setting” is set to “Alarm preferred”)
≥
Notification of Timer Recording
(When the start date/time comes, the FOMA phone works according to the setting of
“Priority”.)
Before Using 1Seg
How to Watch a 1Seg Program
Channel Setting
Activating 1Seg
1
2
To watch 1Seg programs, you need to execute Channel Setting and to
select a channel list in advance. You can store up to 10 channel lists.
≥
The broadcasting stations you can receive differ depending on the local area. If you
store a channel list of the area for traveling or business trip, you can watch programs in
the area just by selecting the channel list.
≥
The remote-control numbers you use with channel selections are previously set for
respective broadcasting stations.
≥
You cannot execute Channel Setting during recording of a 1Seg program.
Information
≥
When you have not inserted the UIM, when you have canceled the contract with
DOCOMO, or when you have temporarily suspended using the FOMA service, you
cannot watch 1Seg programs.
≥
Even when you have inserted the UIM contracted with DOCOMO, you might be
disabled to start 1Seg if you repeatedly watch 1Seg programs in the condition the
FOMA phone cannot communicate such as when you are out of the service area. In
that case, try to start 1Seg in the condition the FOMA phone can communicate such
as by moving into the FOMA service area.
≥
When you watch a 1Seg program for the first time, start 1Seg in the FOMA service
area.
≥
1Seg is not available while “USB mode setting” is set to “microSD mode” or “MTP
mode” and the FOMA phone is connected to a personal computer.
≥
1Seg might automatically start when you end a call by closing the FOMA phone
during a call. In such a case, be careful not to use the FOMA phone close to your ear
because audio is output at the sound volume for 1Seg.
≥
The life of battery pack may shorten if you watch 1Seg programs for a long time
during charging.
≥
1Seg is not available overseas.
<Channel Setting>
Setting Channels