Docomo FOMA P706ie, Instruction Manual, Page: 258 / 577

256
Osaifu
-Kei
tai/T
or
uCa
<Copy (Copy to microSD)>
≥
The ToruCa file (details) is copied as a ToruCa file before obtaining details if it
contains the data file with the UIM security or whose output from the FOMA phone is
prohibited.
≥
When the number of files in the destination folder on the microSD card is full, a new
folder is automatically created and ToruCa files are saved to that folder.
When copying is completed, the message “This folder is set for storage XXXXXXX”
(XXXXXXX denotes a folder name) appears.
≥
The name of copied ToruCa file is TORUCXXX (XXX denotes a numeral).
≥
When no folder is set as a destination folder on the microSD card, a new folder is
created automatically and the file is saved to the folder. After saving, the newly
created folder is set as the destination folder.
≥
You might not be able to execute “Copy to microSD” for the ToruCa file depending on
its file size.
<Copy (Copy to phone)>
≥
You might not be able to execute “Copy to phone” for the ToruCa file depending on its
file size.
<Operate image>
≥
The image satisfying the following conditions is saved as a frame or a mark:
・ Transparent GIF file that is not an animation GIF file
・ The file extension is “ifm”.
・
Images of Stand-by (240 x 427), CIF (352 x 288), QVGA (240 x 320),
QCIF (176 x 144), or Sub-QCIF (128 x 96) are saved as frames; and images of
Stand-by (240 x 427) or smaller except frames are saved as marks.
Information
1
m 1
Osaifu-Keitai
1
Settings
1
Do the following operations.
<ToruCa Settings>
Setting about ToruCa
Item Operation/Explanation
Receive ToruCa You can set whether to obtain ToruCa file from a scanning device
using the IC card function.
1
Accept or Reject
ToruCa from
dataBC You can set whether to obtain ToruCa files automatically from
data broadcasting while watching a 1Seg program.
1
Auto receive ON or Auto receive OFF
Receiving display You can set whether to display the detailed ToruCa File display
when you obtain a ToruCa file while the Stand-by display is
shown.
1
ON or OFF
Check same data You can set whether to check the same ToruCa file is already
obtained before obtaining a ToruCa file from a scanning device or
obtaining a ToruCa file automatically from data broadcasting
while watching a 1Seg program.
1
ON or OFF
ON . . . . Checks and does not obtain a new ToruCa file if the
same ToruCa file is already obtained.
OFF . . . Does not check. Obtains even the same ToruCa file.
Auto reading You can set whether to have the available ToruCa files
automatically recognized for when you place the FOMA phone
over the scanning device.
1
Accept or Reject
Information
<Check same data>
≥
The ToruCa files stored in the “Used ToruCa” folder or expired ToruCa files are not
included in target files.
<Auto reading>
≥
If “Auto reading” is set to “Reject”, you might not be able to use ToruCa files.