Docomo FOMA P706ie, Instruction Manual, Page: 172 / 577

170
i-m
o
de
/i
-m
ot
ion
/i
-Ch
a
n
n
e
l
Character size See “i-mode” on page 112.
Set image display You can set whether to display images or Flash movies included
on sites or in screen memos.
1
ON or OFF
Set connection
timeout See page 170.
Host selection See page 170.
i
motion auto-play See page 176.
Use phone
information To display a Flash movie while a site or screen memo is
displayed, the information in the FOMA phone may be used. You
can select whether to permit the information to be used for that
case.
1
YES or NO
Sound effect setting You can set whether to make an effect tone sound for when you
display a Flash movie while a site or screen memo is displayed.
1
ON or OFF
Check settings You can check each of “i-mode settings”.
Reset last URL See page 158.
Item Operation/Explanation
Information
<Set image display>
≥
Even when “ON” is set, images might not be displayed correctly. In this case, “ ” is
displayed.
≥
When “OFF” is set, “ ” is displayed and the data file is not received.
≥
If you change this setting, “Set image display” of “User settings” of “1Seg” is also
changed.
<Use phone information>
≥
The available information is as follows:
・ Date and time set by “Set time”
・ Reception level of radio waves
・
Battery level
・ Sound volume set by “Phone” of “Ring volume”
・ Language selected by “Select language”
・ Model name and serial number of FOMA phone
<Sound effect setting>
≥
Even when “ON” is set, the effect tones may not sound depending on Flash movies.
It may take long to obtain some sites. You can set the time to wait before
canceling obtaining. Obtaining is not canceled automatically when
“Unlimited” is set.
1
i
1
i-mode settings
1
Set connection timeout
1
Select a timeout value.
You can set the host (APN) to use for receiving services other than
i-mode (DOCOMO).
If you change this setting, you will not be able to use i-mode.
1 i 1
i-mode settings
1
Host selection
1
Highlight <Not recorded> and press
l
( )
1
Enter your Terminal Security Code.
≥
If you select a stored host, the setting is changed to the selected one.
≥
To delete the stored host, press
i
( ), select “Delete”, enter your Terminal
Security Code, and then select “YES”.
<Set Connection Timeout>
Setting Connection Timeout
Information
≥
Even when you have set “Unlimited”, you may be disconnected owing to radio wave
conditions.
+ m - 8 - 1
<Host Selection>
Changing a Host from i-mode
(ISP Connection Communication)
※ Normally, you do not need to change this setting.