Docomo FOMA N901IC, User Manual, Page: 576 / 596

574
Appendix
Memory dial (Phonebook function) and Downloaded information
● Information you stored in your mobile phone should be kept separately in a notebook. Under no circumstances shall NTT
DoCoMo be held liable for any loss of or damage to the stored data in your FOMA terminal.
● In the course of repairs to or model change of your mobile phone, data, such as downloaded data, data created by the
user or data imported from external sources, may be modified or lost. Furthermore, DoCoMo may conduct repairs that
entail replacing your mobile phone with an equivalent product, in which event it is not possible to transfer such data in its
entirety to the replacement product. DoCoMo accepts no liability whatsoever in the event of this.
<Software update>
Software Update
Check whether software in the FOMA terminal needs to be updated, and download the updated software by using
i-mode if necessary.
If software update is required, we will notify the guidance in the DoCoMo’s web page or “
お知らせ&ヘルプ
” (News &
Help) in iMenu.
●
The packet communication to update the software will not be charged.
● There are 2 ways to update software as follows:
Now update
: Perform update immediately as you want to update the software.
Reserved update : Set the date and time you want to perform update, then the software will be downloaded and
updated automatically on the specified date and time.
● You can also update the software if the i - mode destination is set as the user destination.
●
Updating the software (downloading and installation) may take some time.
● When you update the software, an SSL connection is established with the server (the software update server managed
by DoCoMo). Validate the certificate beforehand. (default setting: Valid. For information on setting procedure
→ P. 232)
●
You must completely charge the battery pack before updating software.
● It is recommended that you update the software in a location with strong radio wave reception (the reception level
indicator shows 3 bars) while stationary state.
* If the signal quality deteriorates during software downloading and downloading is canceled, move to a location with better
signal reception and update the software again.
●
If “PIN1 code entry set” is set to “ON” and you run the software update, the PIN1 code entry screen is displayed after
automatically restarting. If you don’t enter a correct PIN1 code, you cannot receive phone calls or mail.
● You cannot update software:
● You cannot use other functions while updating the software. However, you can receive voice calls during downloading.
●
If the software has already been updated, “No update is needed Please continue to use as before” is displayed when you
check for new software updates.
■
IMPORTANT!
●
Never peal off the seal or the model name plate attached to the FOMA terminal.
The seal or plate functions as a certification that the equipment conforms to the prescribed technical standards. If the seal or the plate is removed or
replaced, repair may be refused because conformity to the standards cannot be determined.
●
Note that the information stored in your FOMA terminal, such as settings of various functions and the total call time, may be lost (reset) if your FOMA
terminal is damaged, repaired or otherwise mishandled. If this happens, please re-enter the information or re-specify the settings.
●
The FOMA terminal incorporates a magnetic element in the following parts. Prevent a bankcard, etc. from being close to the earpiece speaker since
it may be damaged. Location used: Neuropointer key, speaker, earpiece speaker
●
If your FOMA terminal is get wet or become moist, you must immediately turn it off, remove the battery pack, bring the FOMA terminal to a repair
shop as soon as possible. However, the FOMA terminal may not be able to be repaired depending on its state.
･ When FOMA card is not inserted
･ Incorrect usage of FOMA card
･ When PIN is locked
･ When PUK code is locked
･ When date and time is not set
･ While there is an incoming call
･ While receiving mail/SMS/message
･ During a call
･ During video-phone call
･ During i - mode connection
･ During 64K data communication
･ During packet communication
･ During all lock
･ When self mode is on
･ When PIM lock is on
･ Out of service area
･ When packet dialing is locked
･ While using mova with dual network service
･ When miniSD reader writer function works
･ While other functions are running