Docomo FOMA N901IC, User Manual, Page: 570 / 596

568
* The miniSD memory card is an optional accessory. → P. 396
Appendix
“Deleting data”
●
When the program was starting, data causing an error was found. Select “OK” to
delete the erroneous data. If the erroneous data is protected, a message is
displayed so select “OK”. P. 580
“Desktop icon is full”
●
This message appears if you attempt to paste a new icon when there are already 15
icons pasted on the standby display. Delete desktop icons that you no longer need
and retry pasting. P. 136
P. 138
“Downloading interrupted”
“Unable to download”
●
Displayed if a communication error occurs or data contains an error when trying to
download data such as a melody, Chara-den or DL dictionary. —
“Draft mail is full”
●
New mail and SMS cannot be composed because there are already 20 saved
messages. Edit and send a saved message or delete some saved messages and
try again. P. 263
(During infrared exchange)
“No response Retry?”
●
The receiving terminal cannot be found/detected. Place the terminals so that their
infrared ports are aligned on the same level. Select “YES” and press
d
to try
again.
P. 413
“Editing now Cannot delete”
●
This message appears if you attempt to delete a message that is in the Draft and
being edited. —
“Enter correct network security code”
●
This message is displayed when an incorrect Network security code is entered for a
function that requires the Network security code. Enter the correct Network security
code. Note that if you forget your Network security code, you must visit an NTT
DOCOMO outlet with your FOMA terminal, your current UIM card and some form of
identification (driver’s license, etc.) proving that you are the subscriber. P. 142
“Error in image Does not work correctly”
●
This message appears when the Flash image cannot be displayed due to an error
found in the data. —
“Failed to export all”
●
Due to an error, the data could not be exported. Insert a new miniSD memory card
and try exporting again. —
“Failed to export one”
●
The attempt to export has failed for some reason. Retry exporting after exchanging
for new miniSD memory card. —
“Format miniSD for your phone”
●
This miniSD memory card is abnormal such as an unformatted card. Format the
miniSD memory card again. P. 406
“Forwarding number is not set”
●
This message is displayed when you have subscribed to the “call forwarding
service” and try to forward an incoming call by selecting “Call forwarding” from the
Function menu without setting the forwarding destination. P. 477
“i-
α
ppli stand-by display terminated due
to security error”
“Software terminated due to security
error”
●
The i-
α
ppli or the i-
α
ppli stand-by display (including the i-
α
ppli DX) terminated
because you attempted to execute unauthorized operation.
P. 323
P. 330
“i
α
ppli To” function is not set”
●
When trying to start the software from a site, mail, the infrared exchange function,
the bar code reader or the IC card, it does not start because the specified software
is not permitted to be interfaced. P. 327
“Input error (205)”
●
This message appears after you enter data on a site or Web page and send the
data. Pressing
d
resets the entered text (the setting or entry made is sent and
this operation does not cancel sending).
P. 209
“Insert miniSD”
●
The miniSD memory card may not be inserted in the FOMA terminal or may not be
inserted correctly. Insert the miniSD memory card correctly. P. 396
“Insert UIM”
●
This message appears when UIM is not correctly inserted or may be damaged.
Make sure that UIM is correctly inserted. P. 35
“Invalid address”
●
The addresses contain a “,” or space and are invalid. Delete any “,” and space.
●
The addresses of the received mail contain more than 50 half-pitch characters and
not valid for send replies.
●
SMS cannot be sent because the addresses contain a character other than
numerals, “#” and “
*
” and space.
Delete excessive digits or any character other than “#” and “
*
” and space.
—
“Invalid content Change i-motion type for
replay”
●
This message appears when you attempt to obtain streaming-type i-motion when
“i-motion type” is set to “Normal type”. P. 337
“Invalid UIM auto start not possible”
●
This message appears when you attempt automatic start of i-
α
ppli restricted by the
FOMA card operational restriction function.
P. 37
Error Message Explanation and Solution See page