Docomo FOMA N901IC, User Manual, Page: 520 / 596

518
Data Comm
unication
ATD Handle the automatic calling process
for the FOMA terminal according to
the specified parameters and dial
parameters. ATD ＊ 99 ＊＊＊ <cid># : Packet
communication
<cid> 1 to 10: displays APN with +CGDCONT
setting.
AT+CBST=116,1,0
ATD<phone number> : 64K communication
AT+CBST=131,1,0
ATD<phone number> : AV32K communication
AT+CBST=134,1,0
ATD<phone number> : AV64K communication
<Packet communication>
ATD
＊
99
＊＊＊
1#
CONNECT
<64K communication>
AT+CBST=116,1,0
OK
ATD090xxxxxxxx
CONNECT
<AV32K communication>
AT+CBST=131,1,0
OK
ATD090xxxxxxxx
CONNECT
<AV64K communication>
AT+CBST=134,1,0
OK
ATD090xxxxxxxx
CONNECT
ATE n
[&F] [&W]
Select whether the echo back is
present for DTE in the command
mode. n =0 : Echo back not present.
n =1 : Echo back present (initial value).
ATE1
OK
ATH n Perform on-hook operation for the
FOMA terminal. n =0 : Disconnect the line (can be omitted). (During packet
communication)
+++
ATH
NO CARRIER
ATI n Display the ID code. n =0 : Display “NTT DoCoMo”.
n =1 : Display the product name (same with
+GMM).
n =2 : Display the version of the FOMA terminal
(same with +GMR).
ATI0
NTT DoCoMo
OK
ATI1
FOMA N901iC
OK
ATO n Return from the online command
mode to the online data mode during
communication. n =0 : Return from online command mode to
online data mode (can be omitted).
ATO
CONNECT
ATQ n
[&F] [&W]
Specify whether or not to display the
result code for DTE. n =0 : Display the result code (initial value).
n =1 : Not display the result code.
ATQ0
OK
ATQ1
(At that time, OK is not
returned.)
ATS0= n
[&F] [&W]
Specify how many times the FOMA
terminal rings before it automatically
receives a call. n =0 : No automatic reception (initial value).
n =1- 255 : A call is automatically answered after
the specified number of rings.
ATS0? : Display the current setting.
ATS0=0
OK
ATS0?
000
OK
ATS2= n
[&F]
Set an escape character. n =43 : Initial value.
n =127: Escape processing is invalid.
ATS2?: Display the current setting.
ATS2=43
OK
ATS2?
043
OK
ATS3= n
[&F]
Set a carriage return (CR) character. n =13 : Initial value
(Only n =13 can be specified).
ATS3?: Display the current setting.
ATS3=13
OK
ATS3?
013
OK
ATS4= n
[&F]
Set a line feed (LF) character. n =10 : Initial value
(Only n =10 can be specified).
ATS4?: Display the current setting.
ATS4=10
OK
ATS4?
010
OK
AT command Outline Description of parameters
Command execution
example