Docomo FOMA N901IC, User Manual, Page: 517 / 596

515
Continued on next page
Data Comm
unication
AT+CLIR= n Sets whether or not to notify the other
party of the phone number when
originating a 64K data communication
call. n =0 : Notify (Not notify) the caller’s phone
number in conformance with the CLIR
service contract.
n =1 : Not notify the other party of the caller’s
phone number.
n =2 : Notify the other party of the caller’s phone
number (Default).
Result: +CLIR( n , m )
m =0: CLIR is not started (Caller ID is always
sent)
m =1: CLIR is started (Caller ID is always not
sent)
m =2: Unknown
m =3: CLIR temporary mode (default is not
notify)
m =4: CLIR temporary mode (default is notify)
* Without the #31# or
*
31#, CLIR setting is
first.
AT+CLIR=0
OK
AT+CLIR=?
+CLIR:0, 1
OK
AT+CLIR=?
+CLIR:(0-2)
OK
AT+CMEE= n
[&F] [&W]
Set whether the error report of the
FOMA terminal is present. n =0:Use the ERROR result (initial value).
n =1 : +CME ERROR:<err> result code is used,
and a numeral value is used for <err>.
n =2 : +CME ERROR:<err> result code is used,
and characters are used for <err>.
AT+CMEE?
: Display the current setting.
The command shown on the right is the
execution example for cases when there is a
FOMA terminal problem or a connection error.
+CMEE ERROR result code is as follows.
1: no connection to phone
10: SIM not inserted
15: SIM wrong
16: incorrect password
100: unknown
AT+CMEE=0
OK
AT+CNUM
ERROR
AT+CMEE=1
OK
AT+CNUM
+CMEE ERROR:10
AT+CMEE=2
OK
AT+CNUM
+CMEE ERROR:SIM
not inserted
AT+CNUM Display the FOMA terminal’s own
number. number: phone number
type: 129 or 145
129 : International access code (+) is not
included.
145 : International access code (+) is included.
AT+CNUM
+CNUM:,“+8190xxxxxxxx”,1
45
OK
AT command Outline Description of parameters
Command execution
example