Docomo FOMA N901IC, User Manual, Page: 499 / 596

497
Continued on next page
Data Comm
unication
4
Check the program name to be deleted
and click “
はい ” (Yes).
Uninstallation starts.
5
Click “OK”.
Uninstallation of the “FOMA PC setting software” is
completed.
W-TCP Settings
“W-TCP Settings” is a “TCP parameter setup tool” to
optimize the transmission capability of TCP/IP when
“packet communication” is carried out on the FOMA
network. The communication settings by this software are
required to make the most of communication performance
of the FOMA terminal.
Setting up and canceling optimization
<For Windows XP>
Optimization settings by dial-up are possible for Windows
XP.
1
Start the program.
(1) If you are operating from “ FOMA PC 設定
ソフト
” (FOMA PC setting software)
Click “
W-TCP 設定
” (W-TCP settings) of “
マ
ニュアル設定 ” (Manual setup) after starting the
program.
(2) If you are operating from the Task Tray
Click the “W-TCP” icon in the Task Tray located on
the lower right-hand side of the desktop to start the
program.
2
Proceed with the following.
Close all the programs open and follow the screen
instructions to reboot the PC. The optimized system
settings become valid after the reboot.
(1) If the system settings have not been
optimized
Clicking “
最適化を行う
” (Optimize) displays the
“
W-TCP（ダイヤルアップ）設定
” (W-
TCP (dial-up) Settings) screen. If you select the
dial-up to be optimized and click “
実行 ” (Execute),
system and dial-up settings will each be optimized.
Note
● Cancel “ W-TCP 最適化 ” (Optimize W-TCP).
The screen shown below appears if “ W-TCP 最適化 ”
(Optimize W-TCP) is done. Click “ はい ” (YES) to uninstall.
W-TCP optimization will be canceled after reboot.
Select NTT DoCoMo “FOMA PC
設定ソフト
(FOMA PC setting
software)”
Click here
Left-click