Docomo FOMA N901IC, User Manual, Page: 496 / 596

494
Data Comm
unication
3
Select “
その他
” (Other) and click “
次へ
” (Next).
4
Enter the dial-up information and click “
次へ
” (Next).
Register the following items in order to connect to a
service provider with ISDN synchronous 64kbps access
points other than mopera when creating a dial-up;
(1)
接続名 (Connection Name) (optional)
(2) モデムの選択 (Modem Selection) (FOMA N901iC)
(3)
電話番号
(Telephone number)
Take care to enter the correct upper/lower case character
for the access point name.
The following reserved characters cannot be entered;
¥/ :
＊
? ! < > | ” (half-pitch only)
Enter the correct information according to the provider
information.
Enter the phone number with half-pitch taking care of
upper/lower case characters.
If “
発信者番号通知を行う
” (Notify Caller ID) is
checked off, the Caller ID will be notified when
communication is carried out.
5
Specify advanced settings (TCP/IP
settings).
When you click “
詳細情報の設定
” (Detailed settings),
the screen for the “IP address” and “Name server”
settings will appear.
If they must be input as the provider or corporate LAN
information, follow the input information directions and
enter the addresses.
6
Specify the “ ユーザー名 ” (User name)
and “ パスワード ” (Password)” and
click “ 次へ ” (Next).
Select the user for Windows 2000/Windows XP.
If you are not sure which user to select, choose “
すべて
のユーザー ”(All users) (default setting).
When setting the user name and password, input the
correct, case-sensitive data provided by the service
provider.
7
Check the setting information and click “
完了
” (Finish).
The contents that were set will be listed. Make sure that
all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する
” (Add dial-up shortcut
on desktop) automatically creates a shortcut icon.
To change any setting, click “
戻る ” (Back).
8
Click “OK”.
The communication set up is carried out on the next set
→ P. 494
Executing Set Data Communication
●
When executing data communication by using the FOMA or
USB connection cable, dialing from the dial-up icon is only
valid for the FOMA terminal used at time of icon creation.
To connect to another FOMA terminal, therefore the
communication setting file must be installed again.
1
Double-click the connection icon on the
desktop.
（
Windows 2000
、
Windows XP
）