Docomo FOMA N901IC, User Manual, Page: 495 / 596

493
Continued on next page
Data Comm
unication
The communication set up is carried out on the next step.
→ P. 494
Easy settings: “Specifying 64K
communication settings using mopera”
● This section explains how to specify settings for 64K data
communication at 64kbps. The DoCoMo Internet connec-
tion service “mopera” will be used as a provider.
● 64K Data Communication: The charges are based on the
amount of time you are connected. With stable 64kbps
communication speed, comfortable Internet access can be
realized.
1
Click “ かんたん設定 ” (Easy settings).
2
Select “ 64K データ通信 ” (64K data
communication) and click “ 次へ ” (Next).
3
Select “
mopera 接続
” (mopera
access) and click “
次へ
” (Next).
See to P. 493 to use any other provider than mopera.
4
Enter the access point name in “ 接続名
” (Name of access point), select modem
and click “
次へ ” (Next).
The “ 64K データ通信設定 ” (64K data
communication setting) screen appears.
You can specify the name of the access point.
Enter a name easy to recognize in the “
接続名 ”
(Connection Name) column.
Enter the connection name correctly including upper/
lower case.
The following reserved characters cannot be entered for
Connection Name;
¥ / :
＊ ? ! < > |” (half-pitch only).
When using the FOMA USB connection cable, confirm
that “
モデムの選択 ” (Select Modem) is set to “FOMA
N901iC”.
5
Specify a user name and password and
click “
次へ
” (Next).
User name and Password can be omitted for the mopera
connection.
Select the user for Windows 2000 and Windows XP. If
you are not sure which user to select, choose “
すべて
のユーザー ”(All users) (default setting).
When setting the user name and password, input the
correct, case-sensitive data provided by the service
provider.
6
Check the setting information and “ 完了 ”
(Finish).
The contents that were set will be listed. Make sure that
all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する
” (Add dial-up shortcut
on desktop) automatically creates a shortcut icon.
To change any setting, click “
戻る ” (Back).
7
Click “OK”.
The communication set up is carried out on the next step.
→
P. 494
Easy settings: “Specifying 64K communication
settings using other providers”
1
Click “
かんたん設定
” (Easy settings).
2
Select “ 64K データ通信 ” (64K data
communication) and click
“ 次へ ” (Next).
（
Windows 2000
、
Windows XP
）