Docomo FOMA N901IC, User Manual, Page: 494 / 596

492
Data Comm
unication
6
Specify the access point (APN).
Number (cid) 1 is assigned with “mopera.ne.jp” by
default.
Open the “
接続先(APN)の追加 ” (Add the access
point (APN)) screen by clicking the
“
追加
” (Add) button, specify an access point name that
supports FOMA packet communication and click “OK”.
Return to the “
接続先 ( APN ) 設定 ” (Specify the
access point (APN)) screen.
Half-pitch alphanumeric characters, hyphen (-) and
periods (.) can only be entered for the access point.
Up to 10 cids can be registered.
7
Set up Advanced settings (TCP/IP
settings).
Clicking “
詳細情報の設定
” (Set up detail information)
on “ パケット通信の設定 ” (Packet Communication
settings) displays the setup screen for “IP address” /
“Name Server”.
If you need to enter information as dialup information for
your provider, company LAN, etc., register each address
according to the entry instructions.
8
Select the Access point (APN) and Click
“OK”.
It returns to the screen in Step 5.
The access point (APN) entered in the Step 6 is
displayed on “
接続先（APN）の選択
” (Select the
access point (APN)).
9
Confirm the Access point (APN) and click
“
次へ ” (Next) on “ 接続先（ APN）の
選択 ” (Select the connecting
destination (APN)).
10
Specify the “
ユーザー名
” (User name)
and “
パスワード
” (Password) and click
“
次へ
” (Next).
Select the user for Windows 2000/Windows XP.
If you are not sure which user to select, choose “
すべて
のユーザー
”(All users) (default setting).
When setting the user name and password, input the
correct, case-sensitive data provided by the service
provider.
11
Check “ 最適化を行う ” (Optimize the
setting) and click “ 次へ ” (Next).
Optimize “
W-TCP 設定
” (W-TCP settings) required for
packet communication. If they are already optimized, this
screen will not be displayed and proceed to Step 12.
12
Confirm the setting information and click
“
完了 ” (Finish).
The contents that were set will be listed.
Make sure that all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する
” (Add dial-up shortcut
on desktop) automatically creates a shortcut icon.
To change any setting, click “
戻る ” .
13
Click “OK”.
You need to reboot the PC to enable the changes in the
settings.
If the reboot screen appears, click “
はい
” (YES).
（ Windows 2000 、 Windows XP ）