Docomo FOMA N901IC, User Manual, Page: 410 / 596

408
* The miniSD memory card is an optional accessory. → P. 396
Displa
ying,
Editing and Or
ganizing Files
● The equipment listed below is required to use the FOMA terminal as a miniSD memory card reader/writer.
Using the FOMA terminal as a miniSD memory card reader/writer
Default setting Communication mode
1
Press
i
s s s s
Select and press
d
s s s s
Press
v
s s s s
Press
1
“Other
settings”
s s s s
Press
g
s s s s
Select “USB mode setting” and press
d
s s s s
Press
2
“miniSD mode”.
2
Connect the FOMA terminal and PC using the FOMA USB connection cable.
The and icons are displayed when the miniSD memory card is inserted and the FOMA USB cable is connected
during miniSD mode.
The miniSD memory card appears in the “My Computer” window on the PC as an external storage device. The miniSD
memory card is not recognized by the PC as a reader/writer while data is being transferred between the miniSD memory
card and the FOMA terminal.
For information on attaching the FOMA terminal to a PC
→ P. 483
■
To cancel “miniSD mode”
Disconnect the FOMA USB connection cable and then change the mode to “Communication mode”.
For information on disconnecting the FOMA terminal to a PC
→
P. 483
Item Description
Connection cable FOMA USB connection cable (optional)
PC PC equipped with a USB port (Universal Serial Bus specification rev. 1.1-compliant) that supports the FOMA
USB connection cable (optional)
Supported software Windows Me, Windows 2000, Windows XP (Japanese versions)
■
Important
●
Take great care to ensure that the FOMA terminal and PC are properly connected. A faulty connection could not only prevent data transfer but could
also result in the loss of data.
●
Attempting to transfer data when the FOMA terminal’s battery level is low or empty could not only prevent data transfer but could also result in the
loss of data. Ensure that the FOMA terminal is fully charged and that there is a stable power supply to the PC.
●
Do not disconnect the FOMA USB connection cable while the call alert indicator/charging lamp is flashing to indicate that data is being copied
between the PC and FOMA terminal. Disconnecting the cable could not only prevent data transfer but could also result in the loss of data.
Note
● You cannot set this function while data is being read from or written to the miniSD memory card. (”Reset” also does not reset the settings.)
● You cannot access the miniSD memory card from the PC while data is being exchanged between the FOMA terminal and the card.
● You cannot access the miniSD memory card from the FOMA terminal while data is being exchanged between the PC and the card.
<Communication mode>
PC PC
miniSD memory
card
FOMA terminal
FOMA USB connection cable (optional) FOMA USB connection cable (optional)
<miniSD mode>