Docomo FOMA N901IC, User Manual, Page: 38 / 596

36
* The miniSD memory card is an optional accessory. → P. 396
Getting Star
ted
●
Inserting
1
Put the IC side downward and put
the FOMA card into the card
inserting slot as shown the
illustration.
2
Insert the FOMA card until it is fixed.
Check that the metallic segment on the lock lever is
located at the left edge as shown in the illustration.
●
Removing
1
Slide the lock holding the FOMA card.
2 The FOMA card is ejected a little.
Carefully pull it out straight.
PIN codes for the FOMA card
You can set two PIN (Personal Identification Number) codes, PIN1 code and PIN2 code, for the FOMA card.
PIN1 code is a 4- to 8-digit PIN code to be entered every time the FOMA terminal is turned on to prevent any
unauthorized use by third parties.
PIN2 code is a 4- to 8-digit PIN code to be entered when user authentication is required for online services such as
accessing a site or the Internet.
●
The default setting for the PIN1 and PIN2 codes is “0000”.
● You can change the PIN1 and PIN2 codes. → P. 143
●
When you purchase a new FOMA terminal and insert your current FOMA card, use the PIN1 and PIN2 codes you set to
the current card.
Note
● Note that using excessive force to load the FOMA (UIM) card could damage the card.
● Take care not to lose the FOMA (UIM) card after removing it from the FOMA terminal.
Crena
IC
Put the gold IC side
downward.
FOMA card
FOMA card inserting slot
When property installed
Metallic segment