Docomo FOMA N901IC, User Manual, Page: 320 / 596

318
i-
α
pplis
● If you delete a mail-connected i -
α
ppli without deleting its folders and then download the mail-connected i -
α
ppli again,
the undeleted folders can be reused. Alternatively, you can delete the undeleted folders and create new folders. If you
neither use the undeleted folders nor create new folders, you cannot download the mail-connected i-
α
ppli.
● If there is memory available for more saved items
1
Select and download the software.
When downloading is completed, the “Completed” message appears. For software that is immediately launched from the
site (P. 319), the software starts up without displaying a completion message.
■ To interrupt data downloading in progress.
Press
d
during downloading.
■
If the software setting display appears
Specify the software settings and then press
o
(Finish).
For information on the software settings → P. 321
2
Select “YES” and press
d
.
When you launch the software, appears at the bottom of the display. If an i
-
α
ppli DX starts up, is displayed.
■
To prevent the software launching
Select “NO” and press
d
.
■
To cancel software launching
Press
d
while the software is starting up.
Note
●
You may be unable to download data from some sites.
●
Some i -
α
pplis automatically open communication after being downloaded. However, to use this service, you must first specify “Network set” in
“Software setting”.
●
You cannot switch tasks while downloading is in progress.
●
If you download an i -
α
ppli that utilizes an i -
α
ppli DX and stored information or mobile phone/FOMA card (UIM) manufacturer numbers, a message
appears notifying you that the i-
α
ppli uses stored information or mobile phone data.
●
When you are downloading i -
α
ppli information or an i -
α
ppli from an SSL site, the icon is displayed.
→
P. 206
●
At the time of purchase, the default “Disp. software info” setting is “Not display.” Selecting “Display” allows you to view the software information before
downloading. When you press
d
, a message appears asking whether to download the software. Select “YES” to start the download.
●
During downloading, a message appears asking whether to sent the mobile phone/FOMA card (UIM) manufacturer number. Select “YES” to start
the download. When this happens, your mobile phone/FOMA card (UIM) manufacturer numbers are sent to the IP (information service provider) via
the Internet and may be disclosed to a third party as a result. Select “NO” to cancel downloading.
●
If you download software that uses the FOMA terminal’s communication functions or that can be set as a stand-by display, the Software Setting
display appears. After selecting the settings for the downloaded software, press
o
(Finish) or
t
.
●
Depending on the data storage capacity of the IC card, you may not be able to download a FeliCa-compatible i
-
α
ppli even when there is space
available in the software storage area. Following the instructions in the confirmation display, delete the displayed software and then try downloading
the FeliCa i-
α
ppli again. Depending on the type of software downloaded, some of the software may not be available for deletion. For some software,
the user has to launch the software and delete data on the IC card before deleting the software program itself.
●
If you again download software you have downloaded once using a different UIM card, a message appears asking whether to overwrite the
software. Select “YES” to start the download. When downloading finishes, the software downloaded using a different UIM card is deleted.
●
The term “i
-
α
ppli mail” refers to mail sent or saved by a mail-connected i
-
α
ppli and mail that has been sent to you to be used in a mail-connected
i-
α
ppli. i-
α
ppli mail contains data that is automatically saved in i-
α
ppli mail folders for use by i-
α
pplis.
●
You can display 3-dimensional images in i
-
α
pplis by loading the 3D polygon* engine.
※
Uses combinations of polygons to display 3D images with depth.