Docomo FOMA N901IC, User Manual, Page: 273 / 596

271
Mail
Replying by referring to received mail
In the received mail detail display function menu...
a P. 289
1
Press
3
“Reply with ref”.
In “Reply with ref”, the top part of the display is the Message entry window, while the lower
part shows the received message (Reference window).
■
To switch between the Reference and Message Entry windows
Select “Change window” in the Function menu or by holding down
e
for 1 second or
longer.
■
To copy the message, subject or address from the Reference Window
Select “Copy” and then “Message”, “Subject” or “Address” from the Function menu in
the Reference Window.
For more information on copying
→
P. 544
■
To reply to the sender of mail with multiple addresses
After selecting “Reply with ref”, select “To sender”.
To send a reply to all the broadcast addresses, select “Reply with ref” and then “To all”.
If replies cannot be sent to the sender, all the addresses, including the other broadcast
addresses, are deleted from the displayed Mail Reply display.
If the list of broadcast addresses includes some to which replies cannot be sent, only
those addresses to which replies cannot be sent are deleted from the displayed Mail
Reply display.
2 Edit the message body and then send the message.
■ To edit the subject
Press
d
to return to the Mail Reply display, select and re-enter the subject.
If you press
d
to return to the Mail Reply display and then display the Message Entry window again, the Reference
window is not displayed.
For details of the subsequent procedure, see steps 6-8 on P. 245.
After the reply has been sent, the Received Mail Detail display appears and the
icon changes to .
Note
● The icon is displayed for senders to whom you cannot reply (e.g. senders with e-mail addresses longer than 50 half-pitch characters).
● You cannot reply to mail if there are already 20 messages in the Draft mailbox.
● If an i - mode mail message contains pasted data, you cannot quote the pasted data in your reply.
● When you reply to i - mode mail that has “Re:” (all half-pitch characters) already included in the subject line, “Re2:” is inserted into the reply’s i - mode
mail subject line instead of “Re:”. Similarly, if “Re2:” is included, “Re3:” is inserted in the reply, and “Re4:” if “Re3:” is included and so on up to
“Re99:”. If the “Re:” in the original mail includes full-pitch characters or an upper case “E” (”RE:”), this is discarded and replaced by “Re:” in your
reply.
● When you reply to a Deco-mail, you cannot quote the inserted image or decoration.
ＳｕｇｉｍｏｔｏＭｉｋｉｋｏ
Ｍｅｓｓａｇｅ
Ｓｅｔ ＦＵＮＣ Ｍｏｄｅ
Ｔｈａｎｋ ｙｏｕ
Ｔｈａｎｋｓ ｆｏｒ ｈｅｌｐｉｎｇ ｍｅ ｙｅ
１００００
Ｒｅｃｖ． ｍａｉｌ １／ ２２
２００５／ ４／１１ １０：３５