Docomo FOMA N901IC, User Manual, Page: 236 / 596

234
i-mode
Using a User Certificate to Connect to a Site
In the sites display...
a
P. 203
1
Confirm user certificate transmission
s
Select “YES” and press
d
s
Enter your
PIN2 code.
■
Notes on Using FirstPass
• FirstPass is DoCoMo’s digital authentication service. When you use FirstPass, the site and your FOMA terminal exchange
certificates so that both parties can each conduct client authentication by checking the certificate provided the other party.
• FirstPass can be used either when the FOMA terminal is directly connected to the Internet or when it is connected via a
PC. When the FOMA terminal is connected to the Internet via a PC, the FirstPass PC software provided on the CD-ROM
bundled with the FOMA terminal must be installed on the PC. For more information, refer to the PDF-format
“FirstPassManual” contained in the “FirstPassPCSoft” folder on the CD-ROM.
To view the PDF-format “FirstPassManual”, you will need Adobe Reader (version 6.0 or later recommended).
If this software is not installed on your PC, you can download it from the Adobe Systems Incorporated website. (Additional
call charges will apply.) Refer to the Adobe Systems Incorporated website for details.
• When requesting a user certificate, carefully read and agree to the “FirstPass usage regulations” shown on your display
before proceeding with your request.
• To use a user certificate, you will need to enter your PIN2 code (P. 143). Take great care to prevent unauthorized persons
from using your UIM card or PIN2 code since all the actions performed subsequent to PIN2 code entry will be assumed to
have been performed by you.
• If your UIM card is lost or stolen, you can have your user certificates invalidated at an NTT DoCoMo service counter.
• NTT DoCoMo is not responsible for and accepts no liability whatsoever regarding the sites or the content provided by
FirstPass compliant sites. Any disputes are to be resolved between the customer and the FirstPass compliant site.
• NTT DoCoMo and its authentication company provide no guarantee regarding security or secrecy in the use of FirstPass
and SSL certificates. Such certificates are used entirely at the discretion of the user.
Changing Your Certificate Host
Default setting DoCoMo
Use this procedure to select a different host when you are downloading a user certificate.
1
Press
i
s
Select and press
d
s
Press
8
“Connection setting”
s
Select “Certificate host” and press
d
.
2
Press
2
“<Not recorded>” and press
o
(Edit)
s
Enter your security code and
press
d
s
Choose from the following options:
For information on security code → P. 142
Note
●
To connect to a FirstPass compliant site using a downloaded user certificate, you must enter your PIN2 code.
●
If you connect to a FirstPass compliant site without a user certificate, or if your user certificate has expired, a message informing you of that fact is
displayed. You can still connect to the site and view subsequent pages by selecting “YES”, but note that it may not be safe to send your personal
information (credit card number, contact details, etc.) on the site. To disconnect, select “NO”. When the “SSL session was terminated” message
appears, press
d
to return to the original display. Download a user certificate from the FirstPass Center before reconnecting to the site.
* There is normally no need to change this setting.
1
Default URL Sets the URL for the host in the initial display. The name can consist of up to 100 half-pitch characters.
2
Host address
Sets the host address. The address can consist of up to 99 half-pitch characters.