Docomo FOMA N901IC, User Manual, Page: 137 / 596

135
Tone/Displa
y/Lighting Settings
Continued on next page
<Illumination in talk>
Setting the In-call Flashing Mode for the Call Alert Indicator
Default settings OFF
This function allows you to set the color in which the call alert indicator flashes during a voice or video-phone call.
1
Press
i
s
Select and press
d
s
Press
2
“Talk”
s
Select “Illumination
in talk” and press
d
s
Select the color and press
d
.
OFF: The call alert indicator for incoming call is not blinked.
Color 1 to 7: Each color blinks.
Gradation 1 to 3: The color 1 to 7 blinks in order.
<Call time display>
Having the FOMA terminal Display the Call Time During Calls
Default settings ON
Use this function to specify whether the FOMA terminal displays the call time during voice and video-phone calls.
● If the call time exceeds “19 hours, 59 minutes, 59 seconds”, the count restarts from “0 seconds”.
●
The displayed call time is intended solely as a guide and should not used as an accurate figure.
●
No call time is calculated during i - mode or packet communication.
1
Press
i48
s
Select
1
“ON” or
2
“OFF”.
<Font>
Changing the Font
Default settings Type: Font 1 Thickness: Medium
Use this procedure to change the text shown in the display and indicator display to your preferred font (typeface).
1
Press
i66
s
Choose from the following options:
Note
● If “Ring tone 1-3” is selected in the Ring tone setting, the call alert indicator flashes in time to the melody regardless of the setting specified in this
function.
● Priority is assigned as follows for call alert indicator operation when call mail settings are duplicated (
q
has the highest priority):
q
Illumination for phonebook utilities
w
Illumination for group utilities
e
Illumination setting
● If “Melody linkage” is set and there is no vibration pattern stored for melody linkage in the ring tones, the “Standard” pattern is used.
● If an i - motion is selected in “Select ring tone”, the call alert indicator flashes in the “Standard” pattern.
● While the FOMA terminal is exchanging data with the miniSD memory card, the FOMA terminal flashes at “Color 5” regardless of the setting
specified in this function.
Note
● While recording “Record message”, playing the answer message or while on answer hold, the call alert indicator flashes in the same pattern as
during a call.
1
Type
s
Select
1
“Font 1” or
2
“Font 2”.
Selects the font. A sample of the selected font appears at the bottom of the display.
2
Thickness
s
Select
1
“Thin”,
2
“Medium” or
3
“Bold”.
Selects the thickness. A text sample in the selected thickness appears at the bottom of the display.