Docomo FOMA D905I, Manual

Page: 89 / 513

87 Phonebook
Checking the number of registered
phonebook entries
Check No. of Items
You can display the number of registered phonebook
entries or phonebook entries with Secret Attribute set
in the phonebook.
･
The number of secret data is displayed only when
Privacy Mode is canceled.
1 Search the phonebook
z m92
INFORMATION
●
The number of registered entries includes the one for
which Secret Attribute is set.
Using simple dialing to make calls
Quick Dial
Phone calls or PushTalk calls can be made by simple
operation to the parties with the phonebook No. 0 to 99
in the FOMA terminal phonebook.
･
The first phone number in the phonebook data is the
number to be dialed.
1 Enter the phonebook No. (in this case
2
)
z
n
(voice call) or
t
(videophone call)
･
Enter the phonebook No. without prefixing it with
a zero (0), etc. If you enter an initial zero, etc.,
the call is not made.
･
To make a PushTalk call: Enter the phonebook
No.
z g
When the phone number of the entry with the
entered phonebook No. is registered in the
PushTalk phonebook, a PushTalk call is made to
the phone number. In case the phone number is
not registered in the PushTalk phonebook, a
PushTalk call is made to the first phone number
of the entry.
INFORMATION
●
While 2in1 is activated, calls are made according to
Phonebook 2in1 Setting.
Using Data Security Service
Data Security Service
Data Security Service enables you to save the data on
your FOMA terminal to the Data Center.
･
For Data Security Service
☛
P127
･
Data Security Service is a pay service and requires a
subscription. For more information, see “Mobile
Phone User’s Guide [i-mode]” .
･
The UIM phonebook cannot be saved.
Saving the phonebook data to the Data Center
1
m z
LifeKit
z 61 z
Yes
z
Enter
the terminal security code
The FOMA terminal phonebook is saved to the
Data Center.
･
If saved phonebook data already exists, it is
updated.
･
When saving or updating is finished, the
execution result is displayed for about 5 seconds.
･
If the phonebook data in the Data Center is
updated more recently than the data on the
FOMA terminal, the data in the Data Center is
saved to the FOMA terminal.
INFORMATION
●
On the phonebook search screen:
m74 z
Yes
z
Enter the terminal security code
●
To restore the phonebook data, save the data from the
site of Data Center to your FOMA terminal. For details,
see “Mobile Phone User’s Guide [i-mode]”.
●
The operations for incoming calls/PushTalk calls while
connecting to the Data Center are as follows:
･
Even in the case of the incoming call from the other
party registered in the phonebook, the name and
image of the other party are not displayed, and only the
phone number is displayed. In addition, the ring alert or
vibrator set in the phonebook data does not operate
and follows the setting of the FOMA terminal.
･
Reject Call, Reject Unregistered Caller and Mute Ring
Time Setting do not operate.
･
Chaku-moji cannot be received.
･
For a PushTalk call, a call is received only when
PushTalk preferred
is set for i-mode Arrival Act: PT.
Communication to the Data Center is disconnected.
●
Automatic updating is available depending on Data
Security Service setting. If any other functions are
executed, the automatic updating is started when
returning to the standby display. The automatic updating
is disabled when the power is turned off or outside the
service area.
You can check the completion of automatic updating with
communication log.
●
The order of the phonebook groups may not be restored
as previously registered.
●
If you have not yet subscribed to Data Security Service, a
screen appears to inform you of that effect.
Example
Calling the phone number with phonebook
No.2