Docomo FOMA D905I, Manual

Page: 314 / 513

312 Data Display/Edit/Management
･
To receive all data items, the sender and the receiver
must enter the same authentication password.
Determine a 4-digit authentication password from
0000 to 9999 in advance.
1
m z
LifeKit
z 212
2 Enter the terminal security code
z
Enter the
authentication password
z
Yes
The FOMA terminal becomes ready to receive
data.
3 Sending side sends all data items
4
Yes
INFORMATION
●
It may take some time when you receive large data or a
large number of items.
●
ToDo data (items in the ToDo list for managing business
activities) cannot be saved on D905i. When all items of
ToDo data and schedule data are received in a batch,
only the schedule data is saved.
●
When all data items are received, the protected data in
the FOMA terminal is also deleted.
●
The folder name that was set by the other terminal may
not be taken over even if you receive all items of mail
from the sending FOMA terminal.
●
When you receive all bookmarks from a FOMA terminal,
you will also receive the folders created to save the
bookmarks in that terminal. Depending on the other
terminal, however, bookmarks may be saved in the first
folder.
Activating infrared communication mode
Infrared Communication Mode
In this mode, you can activate an i-
α
ppli application by
receiving the i-
α
ppli activation data from an infrared
communication device having the i-
α
ppli activation
function.
･
It is necessary to download the specific software from
sites, etc. in advance.
･
If i-
α
ppli is set not to respond to the i-
α
ppli To from
an external device, i-
α
ppli cannot be activated.
1
m z
LifeKit
z 211 z
Yes
The FOMA terminal becomes ready to receive
data.
2 Receive the i-
α
ppli activation data from an
infrared communication device
Using the infrared remote control function
The FOMA terminal can be used as an infrared remote
controller if you download the i-
α
ppli of infrared remote
control of function.
･
Download the i-
α
ppli corresponding to your
equipment.
･
If you activate the preset i-
α
ppli “ Gガイド番組表リモ
コン ” (G-GUIDE TV Remote Controller), you can use
your FOMA terminal as an infrared TV remote
controller.
☛
P219
･
Control may be affected by nearby devices that
support infrared communication or ambient
brightness.
･
Some equipment cannot be operated even if it
supports infrared remote control.
Point the infrared data port of the FOMA terminal at the
infrared receiver of the equipment and perform remote
control operation (operation differs depending on
i- α ppli). Effective angle for remote control is 15
degrees from the center and the distance is about 4 m
at the maximum. However, the angle and distance
effective for the operation differs depending on the type
of devices to operate and the level of ambient
brightness.
Setting operations for data exchange
Data Exchange Setting
Set operations for data exchange via infrared
communication, iC communication and USB
connection.
1
m z
LifeKit
z 25 z
Set each item
z p
Remote control operation
End alert
：
Set whether to sound a beep at the end of
communication.
Infrared receiver
Infrared data port
Approx. 4 m
15
° 15 °