Docomo FOMA D905I, Manual, Page: 509 / 513

40
■ Communication protocol result code
■ Display example of result codes
When “ATX 0” is set
Regardless of the settings of the AT
￥
V command
(
☛
P37), only
CONNECT
is displayed upon
completion of connection.
Text display example:
ATD ＊ 99 ＊＊＊ 3#
CONNECT (“1” in numeric display)
When “ATX 1” is set
･
When “ATX1”, “AT
￥
V0” is set (default)
Upon completion of connection, the result code is
displayed in the following format: CONNECT
<speed between the FOMA terminal and PC>
Text display example:
ATD
＊
99
＊＊＊
3#
CONNECT 460800 (“1 21” in numeric display)
･
When “ATX1”, “AT ￥ V1” is set* 1
Upon completion of connection, the code is
displayed in the following format:
CONNECT<speed between the FOMA terminal
and PC><communication protocol><the dialup
connection APN><upload top speed between the
FOMA terminal and the wireless base station>/
<download top speed between the FOMA terminal
and the wireless base station>*
2
Text display example:
ATD
＊
99
＊＊＊
3#
CONNECT 460800 PACKET mopera.net/64/384
(“1 21 5” in numeric display)
Indicates that speed between the FOMA terminal
and PC is 460,800 bps and the terminal is
connected to mopera.net providing a maximum
upload speed of 64kbps and a maximum
download speed of 384kbps.
*1 When “ATX1” and “AT ￥ V1” are set at the same
time, it is likely that dialup connection will fail.
It is recommended that this function be usually
set to default, which is “ATX1” and “AT
￥
V0”.
*2 When “AT ￥ V1” is set, <the dialup connection
APN> and after that are displayed only when
connected with packet communication.
No. Text display Meaning
1 PPPoverUD Connected via 64K data
communication
3 AV64K AV (videophone) connected via [64K]
5 PACKET Connected with packet
communication
D905i_E_Manual.fm 40 ページ ２００７年１０月１６日 火曜日 午前１１時５５分