Docomo FOMA D902i, Manual, Page: 98 / 500

96
PushTalk
Operation during PushTalk
The following operations can be performed from the submenu. You can change the volume during
PushTalk with
%
.
*1 You can change this setting even while the alarm is sounding. The new setting takes effect after the alarm
stops.
Receiving PushTalk calls
･
You can answer a PushTalk call by pressing
0
to
9
,
(
, or
#
as well as
g
or
n
(Any
Key Answer).
☛
P63
1
An incoming PushTalk call is received
The PushTalk ring tone sounds, the display lights, and the call indicator lights or blinks.
2
g
or
n
You can answer the PushTalk call and
Connected
is notified to the other party.
･
Pressing
f
disconnects the call without answering it. For a group call, Disconnected is notified to
each group member before disconnecting the call.
･ When PushTalk Auto Answer is set to
ON
, incoming PushTalk calls are automatically answered.
Your FOMA terminal is switched to the communication that uses the speakerphone function.
In Silent Mode, however, the auto answering function does not work. Answer by pressing
g
or
n
.
3
Communicate on PushTalk
･
For details
☛
P95, Step 3 of “Communicating on PushTalk”.
4
f
when you end PushTalk
･ To end a PushTalk call by closing the FOMA terminal, change the setting of PushTalk Close
Setting .
Submenu item Description Page
a
Reconnect alarm
* 1 Set an alarm sound indicating reconnection of a PushTalk call
under improved signal quality which has been cut off due to poor
signal quality.
P59
b
Setting when folded Set whether to end PushTalk by closing FOMA terminal. P103
c
PushTalk arv. act
Set the action against an incoming voice call during PushTalk. P102
Phone number, name (if registered in the FOMA
terminal phonebook), and
User unset
Blinking
appears on the caller’s screen.
Rece
iv
in
g
P
u
sh
Ta
lk
ca
ll
s