Docomo FOMA D902i, Manual, Page: 480 / 500

478
App
e
n
d
ix/Data In
te
rchang
e
/Troub
leshooting
■ Repairs may not be possible in the following
cases:
･
Repair is not possible when corrosion due to
exposure to moisture, condensation or
perspiration is detected in a moisture seal
reaction or test, or if any of the internal boards
are damaged or deformed. Since these
conditions are outside the scope of the warranty,
a repair, if at all possible, will be charged.
■ After expiration of the warranty
･
All repairs that are requested are charged.
■ Replacement parts
･
FOMA terminal’s replacement parts (parts
required to maintain product function) will be
kept in stock for at least 6 years after
termination of production. The product can be
repaired during this period. Depending on the
nature of the required repair, it may still be
possible to repair your phone even after this
period. Contact “Repairs” listed on the back of
this manual.
･
For details, see “List of service stations” attached.
■ Notes
･
Do not modify the FOMA terminal or its
accessories.
･
Fire, injury or damage may result.
･
In order to prevent interference of radio waves
or network breakdown, the FOMA terminal
and UIM are manufactured according to
technical standards stipulated by law. Do not
use FOMA terminals or UIMs that do not meet
these standards.
･
If the FOMA is modified (part replacement,
modification, painting, etc.) it will be repaired
only after the modified parts have been
restored to the condition at the time of
purchase. However, repair may be refused
depending on the nature of modification.
･
Repair of failures or damage caused by
modification are charged even during the
warranty period.
･
Do not remove any inscription stickers attached
to your FOMA terminal.
The inscription stickers certify that the FOMA
terminal satisfies specific technical standards.
Note that if stickers are removed intentionally or
are reattached in such a way that confirmation
of the sticker’s contents is impossible, repair or
servicing may be refused because confirmation
of whether or not the phone conforms to
relevant technical standards cannot be made.
･
The on/off function settings, the information of
total calls duration or stored data may be
cleared (reset) by failure, repair or other
handling processes. Should this happen, set up
the functions again.
･
Magnetic components are used in the earpiece
and speaker of the FOMA terminal. Do not allow
cash cards or other devices that are vulnerable
to magnetism to come into contact with the
phone.
･
If your phone becomes wet or moist, turn the
power off and remove the battery pack
immediately and bring it to a repair office
designated by DoCoMo as soon as possible.
However, repair may not be possible depending
on the condition of the phone.
■ Phonebook data, downloaded data or IC card
data
･
Maintain a separate record of the data you
register in your FOMA terminal. DoCoMo will not
accept any liability and responsibility
whatsoever for changes or loss of information.
･
Data created, imported or downloaded by the
subscriber may become corrupted or be lost
when changing the model or repairing mobile
phone. DoCoMo will not accept any
responsibility for that.
Also, DoCoMo may, at its option, repair a mobile
phone by replacing it. In such an event, it will not
be possible to transfer the data (except some
data) to the new phone. Regarding this FOMA
terminal, images and incoming melodies
downloaded via i-mode official sites can be
transferred when repairing the mobile phone
(some contents cannot be transferred and
transferring may be unavailable depending on
the degree of malfunctions).
Updating Software
Software Update
This function checks for the necessity for updating
FOMA terminal software and downloads part of the
software as required through packet
communication*
1
to make updates of the software.
When software update is required, the
information will be posted in “
お知らせ＆ヘル
プ (Notice & Help)” on the DoCoMo website or
iMenu.
*1 Packet communication for software update is free
of charge.
So
ft
w
a
re
U
p
d
a
te