Docomo FOMA D902i, Manual, Page: 411 / 500

409
Data Com
m
u
n
icat
ion
■ Easy setup
Creating a dialup connection for FOMA data
communication and W-TCP setup can be
performed automatically by following the
instructions in the guide.
■ W-TCP setup
This function optimizes the settings in the PC
required for FOMA packet communication.
Optimization of the communication settings using
W-TCP setup is required to enable full use of
communication performance.
■
Dialup connection (APN) setup
This function performs dialup connection (APN)
setup required for packet communication.
Unlike 64K data communication, phone numbers
cannot be used as a dialup connection for FOMA
packet communication. Set a dialup connection name
called APN in FOMA terminal for each dialup
connection in advance, and enter the registration
number (cid) in the phone number field of dialup
connection. By default, “mopera.ne.jp” (APN) is
registered in cid 1 to connect to “mopera”, and
“mopera.net” (APN) for cid 3 to connect to “mopera
U”, but the APN for connections to other providers
and in-house LAN must be set.
Installing FOMA PC configuration software
･
Uninstall an old version of the FOMA PC
configuration software (version 1.00), if already
installed, before installing FOMA PC configuration
software (version 2.00) from attached CD-ROM.
You can display the version from
メニュー
(Menu)
→
バージョン情報
(Version information) of FOMA
PC configuration software.
･
When “W-TCP environment configuration
software” (herein after referred to as old “W-TCP
configuration software”) and “FOMA data
communication configuration software” (herein
after referred to as old “FOMA data communication
configuration software”) provided with FOMA
terminals which were released before this model
are installed, uninstall these software in advance.
･
Before operation, read “Before installation/
uninstallation”
☛
P406
For Windows XP
1
Insert the attached CD-ROM into the PC
2 Click スタート and ファイル名を指定し
て実行
z
Enter “<CD-ROM drive letter>:
￥
FOMA_PCSET
￥
setup.exe” in
名前
z
Click
OK
3
Click
次へ
(Next)
FOMA PC configuration software license
agreement appears.
4 Read the content of the screen and click
はい if you agree to the agreement
5 Check that
タスクトレイに常駐する
(Reside in task tray) is selected and click
次へ
W-TCP
設定
(W-TCP setup) resides in the task tray
after the setup.
☛
P415
･
Residing in task tray is the recommended
setting for optimum control of “W-TCP
communication” setting and cancellation.
･
You can change the setting of resident
software after the installation.
6 Check the installation path and click 次へ
7 Check the name of the program folder and
click
次へ
8
Click
完了
(Done)
The “FOMA PC configuration software” is started up.
･
Settings can be started from this screen.
INFORMATION
●
If “FOMA PC configuration software”, old “W-TCP
configuration software”, and old “FOMA data
communication configuration software” are already
installed, the screen to cancel the installation
appears. Click OK to uninstall these softwares and
then install “FOMA PC configuration software”.
Example
Next
Co
mm
unication
using
FO
MA PC
confi
guration
soft
w
a
re