Docomo FOMA D902i, Manual, Page: 385 / 500

383
O
ther Conve
n
ient
Fun
c
tions
■ Resetting the total calls duration:
a
p z
Enter the terminal security code
b
1
to
4 z
Select
Yes
･
To return to the call duration screen:
p
Checking the call cost
1
m8441
･
If the total cost of calls was reset in the past,
the cost of the total calls made up to the
present after the reset is displayed.
■ Resetting the total call cost:
p z
Enter
PIN2 code
z
Select Yes
INFORMATION
● No last charge information appears as
“
＊＊＊＊＊＊ YEN”.
●
When you switch from the voice call to the
video-phone during a call, the last call cost shows
the total amount of them. During the operation to
switch, no call cost is required.
●
When the last or total duration of voice/video-phone
call or data communication exceeds 9,999 hours 59
minutes 59 seconds, counting is restarted from 0
second.
●
When FOMA terminal is turned off, the last call
duration is stored, but the last call cost is displayed as
“
＊＊＊＊＊＊ YEN”.
● The duration of receiving a call and ringing time
cannot be counted.
●
The call duration and call cost is not counted for
i-mode communication, packet communication, and
PushTalk communication. For details of those usage
fees, see “i-mode User’s Manual” you received
when you subscribed to i-mode.
Reset the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the
1st day of each month.
1
m8444
2 Enter the terminal security code
z 1
･
To cancel:
2
3 Enter the PIN2 code
INFORMATION
● When the setting is
ON
, the call cost will be reset if
you change the date and time to the next month in
Date and Time Setting.
● When the setting is
ON
, if the terminal is not turned on
or if you talking on the terminal at 0 o’clock of the first
day of the month, a reset will take place when you
turn the power on or end the call.
● Even if the setting is
ON
, the setting is canceled
when the UIM different from the one used during the
setting is inserted and then turn the power on. It
doesn’t return to the previous setting even if the UIM
used when setting it is inserted again.
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost and, when the
total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
1
m8442
2 Enter the terminal security code
z
Select
and set each item
Total voice calls
：
The total duration of voice calls made
Total videophone calls
：
The total duration of video-phone calls made
Total data sessions
：
The total duration of data communication
established
Last call cost: Voice
：
The cost of the last voice call
Last call cost: VP
：
The cost of the last video-phone call
Last call cost: Data
：
The cost of the last data communication
Total calls cost
：
The total cost of voice/video-phone call and
data communication
Reset: day & time
：
The date and time of the last reset
Default OFF
Default Alert: OFF
Alert ：
Set whether to notify when the total call cost
exceeds the set amount.
･
If OFF is set, the items below cannot be
set.
R
e
s
e
t Ca
ll
Co
s
t
Next