Docomo FOMA D902i, Manual, Page: 354 / 500

352
Displ
a
y
ing/Edi
ting/
Ma
n
a
gi
ng Da
ta
･
The infrared communication function of this
terminal conforms to IrMC 1.1.
･
Even if the terminal of the other party conforms to
IrMC 1.1, some data may not be sent/received
depending on the data type.
･
The data including pictograms may not be
displayed correctly when sent to other than
i-mode terminals. Even when sending to i-mode
terminal, the data including pictogram 2 may not
be displayed correctly depending on receiving
terminals.
Using infrared communication
The maximum communication range is approximately
20 cm and the angle is within 15 degrees from the
center. Keep FOMA terminal pointing at the remote
device’s infrared data port and do not move it until all
the data have been sent or received.
･
Infrared communication may not be performed
properly in areas of direct sunlight or directly
under fluorescent lights.
･
The folder name that was set by the other
terminal may not be taken over even if you
receive all items of mail.
･
If you receive mail, usual mail may be stored in
the folder for the Message i-
α
ppli in Inbox,
Outbox or Unsent messages.
･
With reception of all items of bookmark data,
the data you will receive covers the entire of the
folder created by the other terminal.
･
Bookmarks received from the terminal other than
D902i may be stored in the top folder.
･
Images, video/i-motion or melodies received from the
terminal other than D902i may be saved as notes.
･
The receiver may not save images, video/i-motion
or melodies because of the difference in the data
size limit.
Sending data by infrared communication
Send Ir Data
You can send data by selecting each item to send
one at a time or by sending all items of the
specified function data at once. The following
data are available for sending:
Notes in receiving the data from the other
FOMA terminal via infrared communication
Notes on sending the data in D902i to the other
FOMA terminal via infrared communication
Infrared data port
Within approx.
20 cm
15 °
15
°
Data type Remarks
Phonebook*
1
･
A phonebook entry for which Secret
Attribute is set can be sent by
sending one item only when Secret
Mode is on.
･
PushTalk phonebook and Own
Number data are also sent when
sending all is performed.
･
Sending one item is unavailable for
the PushTalk phonebook.
･
Phonebook data cannot be sent
when Keypad Dial Lock is on.
･
When Ph.book image sending is ON
for Data Transfer Setting, still
images saved in the phonebook
data can be sent together. However,
images may not be received
depending on the recipient.
Schedule*
1
･
A schedule for which Secret
Attribute is set can be sent by
sending one item only when Secret
Mode is on.
･
Date and Time Setting is required.
Received mail*
1
Sent mail*
1
Unsent mail*
1
･
Attached data in the text (link items
that activate i-
α
ppli) are deleted.
Note*
1
−
Bookmark*
1
･
Folder settings may not be reflected
depending on the recipient.
･
When sending all, bookmarks are
sent from the end of the list.
Image
･
A display name of up to 18 one-byte
or 9 two-byte characters can be
sent. Characters that exceed the
maximum number will be deleted.
･
Data of over 500 KB cannot be sent.
Video/
i-motion
･
A display name of up to 18 one-byte
or 9 two-byte characters can be
sent. Characters that exceed the
maximum number will be deleted.
Melody
･
A title of up to 50 one-byte or 25
two-byte characters can be sent.
PDF data
･
PDF data which is over 512 KB or
downloaded partially cannot be
sent.
Send I
r D
a
ta
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P339