Docomo FOMA D902i, Manual, Page: 285 / 500

283
Ma
il
Using SMS (Short Message Service)
Menu 171
Composing and sending SMS
Compose SMS
Compose and send SMS messages. SMS can be saved without sending.
･ Maximum number of sent/unsent messages that can be saved
☛
P36
･
If you use one-byte katakana and pictograms, the receiver may not be able to display them correctly.
･
SMS can be sent and received from the parties that use overseas carriers other than DoCoMo.
Please visit the DoCoMo website for the countries where the service is provided and oversea carriers
available.
･
Reading the received/sent/unsent SMS list/view screen
☛
P260
Composing and sending an SMS message by entering address directly
1
a71 z
Select field
2
Select
Direct input
z
Enter the address (party’s phone number)
･
When the address is registered in the phonebook, the registered name is displayed in field.
･ To send to a party that uses an overseas carrier other than DoCoMo, enter “+” (by pressing
0
for over a second) and the country code plus the party’s mobile phone number. Omit the first 0 of
the phone number. You can also send by entering “010” and the country code plus the party’s
mobile phone number (add “010” when replying to a received SMS message from overseas).
･ You can enter up to 26 characters in field. However, up to 20 characters (21 characters if
“+” is contained) can be sent as address.
■
Searching the phonebook: Select View phonebook
z
Search the phonebook
z
Select a
phone number
3
Select
z
Enter the message
･
When the font type is set to
Japanese
in SMS Setting, up to 70 one-byte or two-byte characters
can be entered. A space is counted as a character in the message.
･
When the font type is set to English in SMS Setting, up to 160 one-byte characters can be entered
including alphanumerics and symbols (except ｀
°
「」 、
･ ゛
and ° ). A one-byte space is counted
as a character in the message.
･
Line feeds can be inserted in the message. Press
#
to enter a line feed in 5-touch Input
Method (except in the one-byte and two-byte numeric modes). A line feed is counted as a
character in the message. However, it is replaced by a one-byte space on the receiver’s terminal.
■ Inserting a signature:
m4
･
Signature must be registered beforehand.
4
Press
p
■ Saving without sending:
m2
･
If neither the address nor message is entered, the SMS cannot be saved.
･
You can edit and send the unsent SMS.
☛
P248
Example
Co
m
pose SMS
Next