Docomo FOMA D902i, Manual, Page: 181 / 500

179
Cam
e
ra
･
When the image size is set to 320 x 240 (QVGA), the video cannot be attached.
･
When the quality of video is set to HQ+ , the video cannot be attached.
■
Setting the video for the stand-by display:
m21 z
Select Yes
The recorded video is saved to FOMA terminal and set for the stand-by display.
･
If zooming is available for the shot video, select
Yes (Same size)
to maintain the image size or
select Yes (Large size) to enlarge it to the screen size.
･
If the i-
α
ppli stand-by display has been set, a confirmation screen asking whether or not to
cancel it is displayed continuously.
･
When the memory to save is set to the miniSD memory card, the image cannot be set for the
stand-by display.
■ Adding the video to phonebook entries:
m2 z 2
or
3 z
Select
Yes
The recorded video is saved to FOMA terminal and the phonebook registration screen is displayed.
･
To register updating, select the phonebook data to register.
･
Videos can be added to the phonebook entry only when the image size is set to 128 x 96
(Sub-QCIF) or 176 x 144 (QCIF) and the recording type is set to
Video only
.
･
When the memory to save is set to the miniSD memory card, the video cannot be added to the
phonebook entry.
■ Changing the title:
m31 z
Enter the title (up to 31 characters regardless of one-
byte or two-byte)
z p
･
The changed title will be valid after the video is saved.
■
Inserting a ticker:
m32 z
Select Yes
The recorded video is saved to FOMA terminal and the ticker setting screen is displayed. Follow
the procedure from Step 3 in “Inserting tickers”.
☛
P332
･
When the image size is set to 320 x 240 (QVGA), a ticker cannot be inserted.
･
When the memory to save is set to the miniSD memory card, a ticker cannot be inserted.
■ Switching the memory to save between FOMA terminal/miniSD memory card:
m5
･
If the file size of the recorded video exceeds 490 Kbytes, the saving destination cannot be
switched.
･
After saving the videos, the setting for the memory to save returns to the setting before switching.
■
Displaying the list of videos saved in FOMA terminal or the miniSD memory card:
m6
z 1
or
2
･
When you display the videos in the miniSD memory card in the list, select the folder.
5
Press
o
or
C
The recorded video is saved in Camera folder of i-motion .
･
When the miniSD memory card is selected as the memory to save, the image is saved in Movie
folder of the miniSD memory card.
■ Checking the saved video immediately:
p z
Select a video
･
After the confirmation, press
c
twice to return to the video recording screen.
･ When the miniSD memory card is selected as the memory to save, select a folder by pressing
p
and then select the video. Press
c
3 times to return to the video recording screen.
･
The check is not available when Movie Camera is started from the phonebook, mail or i-
α
ppli
software.
INFORMATION
INFORMATION
●
When key operation is made or recharging is started during recording, operation tone may be recorded.
●
Recording may be stopped before the file size reaches the limit set for the size restrictions, depending on data
you record.
●
If you set the size restrictions to None , data may not be saved when the battery power goes out during recording.
●
When there is not enough memory or the saved data exceeds the maximum number, delete unwanted videos
or sounds or change settings of the size restrictions according to the screen.
Next
M
o
vi
e
Ca
me
ra