Docomo FOMA D902i, Manual, Page: 157 / 500

155
Safe
ty sett
ings
● The calls or PushTalk calls received during All Lock are rejected but, they are recorded as missed calls in the
received call history. (The other party hears busy signals for the call, or is notified
Disconnected
for the
PushTalk call.) When All Lock is canceled, with the number of missed calls is displayed on the stand-by
display.
● i-mode Mail, SMS and Message R/F can also be received when All Lock is on, but the receiving screen, icon
for the received mail and reception result screen are not displayed. When All Lock is canceled, the icon for the
received mail is displayed.
● ToruCa can be obtained by holding up the FeliCa mark to the reader/writer even when All Lock is on, but it
cannot be displayed. When All Lock is canceled, with the number of the ToruCa data is displayed on
the stand-by display.
● When All Lock is on, the alarm or schedule alarm does not operate even when the specified date and time
arrives.
● When All Lock is on, the i-channel information is not displayed as ticker on the stand-by display.
● If a wrong terminal security code is entered 5 times consecutively when canceling All Lock, the power is
automatically turned off.
Preventing unauthorized use of your terminal by remote access
Remote Lock
If you make a voice call to FOMA terminal under the preset operating conditions in case your
FOMA terminal is lost or stolen, Auto Lock and IC Card Lock are set to prevent unauthorized use
by others.
Setting Remote Lock operating conditions
1
m8313
2
Enter the terminal security code
z
Select each item to set
■
Setting the sender’s information
a
Select
Sender1
to
3
field:
b
Select
Select sender
field
z 1
or
2
･
When Sender number is set, enter a phone number in the entry field. Press
t
to enter from
the phonebook.
c
p
3
Press
p
Default OFF
Remote lock ： Sets whether to enable or disable Remote Lock.
･
When
OFF
is set, the following items cannot be set.
Monitoring period
： Sets the time limit from the time of the first incoming call to the time until the
specified number of calls will be received (in the 1 to 10 minutes range). Even
after the time limit has expired, if the specified number of calls are not received,
Remote Lock is not activated. In addition, the number of incoming calls that
have been counted is reset.
Received calls
：
Sets the number of voice calls received before Remote Lock is activated
(between 3 to 10 times).
Sender1 to 3
：
Sets the original phone number that activates Remote Lock. The number of
payphone can also be set.
Rem
o
te
Lock
Next