Docomo FOMA D902i, Manual, Page: 15 / 500

13
Qui
ck Se
arc
h
/
C
onte
n
ts
/C
a
u
tions
Handling the FOMA terminal, battery pack, adapter (and charger) and the UIM (general information)
Use only DoCoMo-certified battery packs, adapters (and chargers) with the FOMA
terminal.
Use of non-specified items could cause the FOMA terminal, battery pack or other devices to leak,
overheat, rupture, catch fire or malfunction.
Do not disassemble or remodel the components. Also, do not solder them.
Attempting to do so will lead to an accident, such as a fire, injury, or electrical shock and damage
the equipment. Doing so may also cause the battery pack to leak, overheat, rupture, or ignite.
Do not use or leave the components in a place near fire or heaters. Also avoid a high-
temperature place exposed to direct sunlight or a car under the scorching sun.
Otherwise, your equipment will get deformed or troubled. The battery pack may leak, overheat,
rupture, or ignite. Other possible problems include a reduction in performance and life. Sometimes,
the casing will partly get heated, resulting in an extremely high temperature to get you burnt.
Do not expose the components to water.
The components may overheat, cause electric shock, fire or damage if exposed to water, pet urine
or other liquids. Do not use the equipment in locations where it could get wet.
Be sure to turn off the FOMA
terminal before entering a place
such as a gas station that is
subject to flammable gases.
Do not charge in such a place.
Charging could cause fire.
When using Osaifu-Keitai inside a gas
station, make sure to turn off the FOMA
terminal in advance. (If IC Card Lock is
set, cancel the lock and then turn the
power off.)
Do not let the recharging terminal
and external device terminal
touch any conductive material,
such as a piece of metal or lead.
Also do not put any conductive
material into the recharging
terminal and external device
terminal.
The battery can short-circuit, causing
fire and damage.
If there is anything wrong (such
as strange odor, heat generation,
color change, deformation, or the
like) with the components while
you are using or charging them or
when they are being stored, you
should take the following steps
immediately.
1. Remove the power plug from
the outlet.
2. Turn off your FOMA terminal.
3. Remove the battery pack
from your FOMA terminal.
Continuing to use the equipment
without taking these steps will cause it
to overheat, rupture, or ignite or cause
its battery pack to leak.
Do not place the battery pack,
FOMA terminal, adapter (and
charger) or UIM in the
microwave oven, high-pressure
cooker or other cooking
appliances.
Doing so could cause the battery pack
to leak, overheat, rupture or ignite, and
could damage the circuitry of the FOMA
terminal and adapter (and charger),
causing overheat, smoke or fire.
Do not expose the components
to strong shocks by dropping or
throwing them.
Doing so could cause the battery pack
to leak, overheat, rupture or ignite, and
damage the equipment, resulting in fire.
DANGER
Battery pack: D06 Desktop holder: D06 Rear cover: D06
FOMA AC adapter: 01 FOMA DC adapter: 01
･
For additional items related to the compatible products, contact the nearest DoCoMo Shop.
WARNING
Next
S
A
F
E
T
Y
P
R
ECAUT
IONS