Docomo FOMA D902i, Manual, Page: 148 / 500

146
Sounds/Di
s
plays
/L
ig
hts
Settings
b
Select
Color
field
z 1
to
9
,
0
,
(
or
#
･
Press
&
to switch the pages.
･
The call indicator flashes by the selected color.
■ Setting
IC card
: Select
IC card
field
z 1
or
2
･
When ON is set, the call indicator lights when holding up the FeliCa mark to the reader/writer.
3
Press
p
INFORMATION
● The names of color are for information purpose only.
● If there are multiple newly-arrived information, the call indicator flashes in the following priority when
Indicator
light
is set to
ON
. However, even if unread ToruCa exists, the call indicator does not flash.
●
Even when Indicator light is set to ON , the call indicator does not flash in the following cases:
･
During receiving a call
･
During talking
･
In Public mode (Driving mode)
●
Even when Indicator light is set to ON , if there have been no newly-arrived information for about 6 hours since
there was the first arrival or if (with the number of newly-arrived information) on the display are
deleted, the call indicator stops to flash even if the information are not confirmed.
●
Even if Sync melody is set for the lighting pattern, it may not be synchronized depending on the melodies.
●
When a call or mail is received from a party registered in the FOMA terminal phonebook, the operation
depends on the FOMA terminal phonebook setting. However, the operation of the call indicator when newly-
arrived information arrives is not changed.
● Even when
IC card
is set to
ON
, the call indicator may not light while Mobile Wallet compatible i-
α
ppli is
activated.
●
Even when IC card is set to ON , if the power is turned off, the call indicator does not light.
●
When IC card is set to ON , the call indicator also lights when the IC card is held over the reader/writer that
Mobile Wallet compatible i-
α
ppli is not registered.
Changing the font size
Font Size
The character size can be changed from 5 types for entering characters by full-screen entry.
1
m8271
2
1
to
5
･
The example in the selected character size is displayed.
INFORMATION
● The font size cannot be changed for entering mail messages or entering characters by in-line entry.
● The character size is changed for displaying a site screen, screen memo and Message R/F. However, if set to
Minimum , the Small character size is set. If set to Maximum , the Large character size is set.
a
Missed calls (voice call/video-phone call/PushTalk call/recorded message)
b
Unread messages (mail/chat mail/SMS)
c
Unread messages (Message R)
d
Unread messages (Message F)
Default Standard
Minimum
: 12 dots Small : 16 dots
Standard
: 20 dots Large : 24 dots
Maximum
: 28 dots
F
ont Size