Docomo FOMA D702iF, Manuals, Page: 47 / 451

45
Bef
o
re Using
D702
iF
2
Select each item to set
･
The entered number can also be increased or decreased with
%
. You can also reenter the number after
highlighting it with
&
.
3
Press
p
The automatic time correction takes place when the UIM is inserted and you turn the power on in a location
where radio waves reach.
･
The automatic time correction sometimes causes a time error of several seconds. In addition, it may fail to
correct the time depending on the radio wave condition.
･
If the time information is received while i-
α
ppli is running, the time may not be corrected depending on the i-
α
ppli.
･
When Auto time adjust is set to ON , the time may not be corrected for a while. To enable the automatic time
correction, turn the power off and then on.
･
When no UIM is inserted or FOMA terminal is out of the service area, the automatic time correction is not
performed even if you turn the power off and then on.
INFORMATION
●
You cannot use the following functions when the date and time are not set:
･
Auto Power ON/OFF
･
Alarm Clock
･
Certificate Download
☛
P196
･
i-
α
ppli auto start
☛
P253
･
i-
α
ppli DX
☛
P246
･
Flash movie which uses the date and time setting
･
Scheduler (including data transfer)
･
Downloading and playing i-motion with replay restrictions set
☛
P281
･
Software Update
･
Update Definition
･
SSL communication (authentication)
･
Random Display Image (when Change image is set to other than Open phone )
●
If the date and time are not set, the date and time are not recorded for the following functions and “----/--/--” or
“----------------” is displayed. A number to segmentalize (segmental number) may be appended.
･
Redial/Received Calls
･
Answer Machine/Voice Memo
･
Notepad
･
Date and time of still image/video shot with the camera
☛
P161
･
Date and time of sent mail/unsent mail
☛
P225
･
Date and time of sound recorded with Sound Recorder
☛
P298
･
Date and time of the last reset of call duration/call cost
･
Date and time in the file name of data scanned by Bar Code Reader
☛
P173
･
Date and time of downloaded i-
α
ppli (detail information)
☛
P249
･
Date and time of saved/registered still image, melody, Chara-den, i-motion or mail template
☛
P291, P214
Auto time adjust
： Set whether to perform the automatic time correction.
･
To enter the date and time manually, set Auto time adjust to OFF.
Offset
： Specify the amount of time advance (+) or delay (-) so that your terminal's clock
advances from or delays to the time obtained for a given length of time.
･
Enter the time between 00h00m and 23h59m.
･
Prefix 0 if the hour and/or minute is a single digit (0 to 9).
Date, Time ： Set the date and time.
･
Enter the year by the last 2 digits of the year. From January 1, 2000 to December 31,
2050 can be set.
･
Enter the time in the 24-hour format (00:00 to 23:59).
･
Prefix 0 if the month, date, hour and/or minute is a single digit (0 to 9).
When the automatic time correction is set
･
When you set
Auto time adjust
to
ON
,
Offset
can be set.
Date
and
Time
cannot
be set.
Date
and Ti
me Setting
Next